How To Switch Out Rollers On a Boat Trailer for Bunk Boards
Question:
I have a1982 Ez-Loader boat trailer, for a 17 foot boat. It is a roller trailer that I would like to convert too a bunk trailer! Could you suggest the parts I would need too convert the trailer! Thanks
asked by: Eric B
Expert Reply:
In order to choose the correct bunk boards for a trailer you'll need to base the length of board to the length of the hull on the boat. There is not an exact formula for this as it is determined by the trailer manufacturer which we are not. However, you can use the roller system you have now to get a good idea of what is needed. The options we offer vary from 2' long to 7' long. The CE Smith Carpeted Bunk Boards for Boat Trailers like part # CE27845 are what I recommend using but you can use more than one per side if needed. I have attached a full list of options below.
In regards to mounting, the CE Smith Bolster and Swivel Bracket Assemblies part # CE10000G-4 along with u-bolts which match your frame size are what I recommend.
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 2 Inch Tall
- 8 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 84 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: ez loader axle
- Search Results: ez loader trailer parts
- Search Results: bunk board brackets
- Q&A: Proper Trailer Bunk Board Length for 21 Foot Boat
- Q&A: Parts to Convert Roller Bunks to Bunk Boards on Boat Trailer
- Q&A: Converting Boat Trailer From Rollers to Bunk Boards
- Q&A: What Parts Are Needed to Replace Roller Bunks with Wood Bunks
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Search Results: equalizer
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Trailer Tire Sizing
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: safety chains
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Shop: Grease Seals 10-36 (pair)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: fender
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Suspension Enhancement