Parts to Convert Roller Bunks to Bunk Boards on Boat Trailer
Question:
I have a dual axle galvanized ez-loader trailer in good shape but with rollers that are starting to go and need replacing. I am considering changing this over to a bunk type trailer. My boat is a heavy 20 foot hydra-sports deep vee dual console..3500 lbs with motor and gear. I was considering dual bunks on each side mounted horizontally or vertically if necessary. Any suggestions on what I might need to make this possible?
asked by: John C
Expert Reply:
It sounds like you are just wanting to switch to carpeted bunk boards. For that you can use the CE Smith Carpeted Bunk Boards for Boat Trailers, which come in a number of different lengths: 5 feet long # CE27820, 6 feet long # CE27840 or 7 feet long # CE27845.
To install these you can mount them to brackets that are already on your trailer or use CE Smith Bolster and Swivel Bracket Assemblies; you would need two of these per bunk board. The assemblies are available in different lengths as well: 9 inches # CE10000G-4, 11 inches # CE10001G-4 and 13 inches # CE10002G-4 and can be attached with U-bolts # CE15283GA-4.
I have added links to video reviews of the boards, brackets and U-bolts for you to take a look at as well.
Products Referenced in This Question
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 2 Inch Tall
- 8 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 11" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 10 Inch Tall
- 2 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 12 Inch Tall
- 2 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 4
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 6' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 72 Inch Long
- CE Smith
more information >
CE Smith Carpeted Bunk Boards for Boat Trailers - 7' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 84 Inch Long
- CE Smith
more information >
Product Page this Question was Asked From
CE Smith Carpeted Bunk Boards for Boat Trailers - 5' Long - 1 Pair
- Boat Trailer Parts
- Bunks
- Bunk Boards
- 3-3/4 Inch Tall
- 1-3/4 Inch Wide
- 60 Inch Long
- CE Smith
more information >
Continue Researching
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Search Results: bunk board brackets
- Q&A: How To Switch Out Rollers On a Boat Trailer for Bunk Boards
- Q&A: Proper Trailer Bunk Board Length for 21 Foot Boat
- Q&A: What Parts Are Needed to Replace Roller Bunks with Wood Bunks
- Q&A: Replacement RV ladder for 2007 Monaco Diplomat
- Article: What Exactly is Tongue Weight?
- Q&A: Replacement Microwave for Highpoint # EC942K9
- Q&A: Comparing Equa-Flex and Road Armor Equalizers For 2000 Forest River WIldwood W/ 5200lb Axles
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper
- Article: How to Charge RV Batteries
- Article: How to Rent an RV
- Article: How to Replace or Install an RV Roof Vent
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Measure for Trailer Hitch Drop
- Article: Where to Position the Trailer Axle?