Trailer Hitch Receiver Fit for 2004 Volvo XC70
Question:
Will this fit a 2004 Volvo XC70?
asked by: Colin
Expert Reply:
We do have a fit for a trailer hitch receiver for your 2004 Volvo XC70, but the Curt Trailer Hitch Receiver - Multi Fit # C13900 will not fit your vehicle.
It seems likely you wanted that hitch because it is a 2' receiver, but unfortunately there aren't any hitches with a 2" receiver that fit your 2004 XC70, so you'll need one with a 1-1/4" receiver, the Curt Trailer Hitch Receiver # C12318.
If you are going to be towing with this vehicle you'll need a couple more things, the Vehicle Wiring Harness # C59236, Drawbar # C45016, Pin and Clip # F-4, and depending on your trailer's coupler either 1-7/8" Hitch Ball # A-80 or 2" Hitch Ball # A-82.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2-1/2" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- 2-1/2 Inch Long
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- 2-1/2 Inch Span
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Multi Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Bolt Hole Spacing of Curt C13900 Multi Fit Class III Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Is The 1/2" Metal Loom Clamp # A0500 a Single Component Or Multiple Clamps?
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does this Hitch Fit a 1985 Jayco Motorhome?
- Q&A: Recommended Trailer Hitch for a 2006 Ford E-450 Super Duty
- Q&A: What Size Frame Does Buyers Products 2" Trailer Hitch 3371801102 Fit?
- Q&A: What is Vehicle Frame Width that Curt Multi Fit Hitch # C13900 Fits
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Parts Needed to Add Hydraulic Drum Brakes to a Trailer
- Article: Rooftop Cargo Carriers
- Article: Hitch Adapters and Extenders