Replacement Lead Leg 2006 Keystone Landing Gear that is 29-1/2 inch

Question

Question:

Inquiring about the lead leg on a 2006 Keystone 5th wheel trailer. 29 1/2. I would like to know if you have such and the cost. Thank You

asked by: Robert S

0

Expert Reply:

You can use the Replacement Lead Jack w/ Drop Leg for Stromberg Carlson Landing Gear part # LG-179013 which has an outer tube that measures 29-1/2" long and is the standard RV leg replacement for several brands like Lippert, LCI, Venture, Stromberg etc.

expert reply by: Jameson C

0

Answer 1

The correct repair kits we have for the Venture Landing Gear Legs VMC900 is part #LC146060 for the follow leg and part #LC146059 for the lead leg.

view full answer...

Answer 2

The Lippert Components Lead Leg Repair Kit #LC146059 and the Stromberg Carlson Kit #LG-146059 referenced in your question are essentially the same kit. I went out to our warehouse to verify this. It is actually not too uncommon for landing gear…

view full answer...

Answer 3

My contact at Lippert Components confirmed that their manual landing gear #LC333966 can indeed be converted to powered operation later on through use of their motor kit #LC142178 and switch kit #LG-145236. You can use the same gearbox that comes with…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Replacement Lead Leg 2006 Keystone Landing Gear that is 29-1/2 inch

Product Page this Question was Asked From

Continue Researching