Recommended Roof Rack to Carry Bikes On 2017 Honda Civic Si Coupe

Question

Question:

I have a Honda Civic Si Coupe. It has a spoiler and I have already tried the truck rack from Yakima and I was faced with having to take the spoiler off. Will the Rhino rack you mentioned fit a coupe?

asked by: Kelly K

0

Expert Reply:

The roof rack options we have available for a 2017 Honda Civic Si Coupe are from Inno not Rhino-Rack, the Inno Aero Crossbar part # INXB130-2,part # INXS250, and part # INK683 is what I recommend. This will then allow you to use pretty much any roof mount bike rack like the Thule ProRide XT Roof Bike Rack part # TH598004.

I have attached a full list of options below.

expert reply by: Conner L

0

Answer 1

The Inno Aero Crossbar System part #INXB108-115, part #INXS200, and part #INK642 is a great cost effective option for a 2015 Honda Civic Coupe and what I recommend using. In fact, it is the most cost effective option we have with the aero shaped…

view full answer...

Answer 2

Sounds like what you need is a roof rack system and a kayak carrier for your 2017 Honda Civic SI Coupe. For the roof rack, my best recommendation for your 2017 Honda Civic SI Coupe is an Inno Roof Rack System with parts #INXB108-2, #INXS200, and…

view full answer...

Answer 3

They are compatible! The Swagman bike rack you asked about will absolutely work with the Inno crossbars and roof rack that fit your 2019 Honda Civic coupe. The exact parts you need for your Civic are the following: - Inno Aero Crossbars #INXB108-2 -…

view full answer...

Answer 4

For your 2019 Honda Civic Coupe we have roof rack fits from Inno and I recommend using the aero crossbars as they look better and do a better job at reducing wind noise and drag than the square crossbars. Here are the parts you'll need: 54"…

view full answer...

Answer 5

The Inno Shaper 100 Roof Cargo Basket #INXA569 would work with the DISCONTINUED Rola Sport REX Series Roof Rack 59686 you mentioned but it is no longer available. Instead, you can use your Inno cargo basket with the Thule WingBar Crossbars #TH711400,…

view full answer...

Answer 6

From the photo that you provided as well as some additional research, the factory crossbars do have top channels. The discontinued Inno Shaper 80 Roof Cargo Basket is compatible with most aero and elliptical crossbars with those top channels. If you…

view full answer...

Answer 7

Getting the inside dimensions of the Yakima SkyBox NX 18 Rooftop Cargo Box #Y45AV was no easy task, I started by contacting the manufacturer but they did not have the inside specs on any of the newer boxes like the NX line. So then we had to pull a…

view full answer...

Answer 8

The Inno Box 2020 Rooftop Cargo Box #IN86FR will fit as long as you have the required 24"-39" crossbar spread. You will need to measure to be sure. Also yes, this will fit on the Inno Aero Crossbars #INXB130-2.

view full answer...

Answer 9

I recommend going with the largest crossbar available so that you have as much room as possible for your cargo. A nice large setup that fits your 2012 Honda Accord Sedan is the Inno Aero Crossbars - Aluminum - Black - 54" Long - Qty 2…

view full answer...

Answer 10

The Yakima SkyBox NX 16 Rooftop Cargo Carrier, #Y95AV, will fit on a vehicle with a crossbar spread between 24 to 36 inches and a maximum crossbar dimensions 3-1/2 x 1-11/16 inches. You will need to check your crossbar spread and the roof line…

view full answer...

Answer 11

There are a couple of things that set the Rhino Rack system using #RRVA150B-2, #RRRCH4, #RRRCP43-BK apart from the Inno system that uses parts #INXB138-2, #INXS350, #INTR154 you're looking at. I'll start out by saying that when it comes to…

view full answer...

Answer 12

Yakima doesn't have any adapters for any of their racks that were made 18 years ago to fit them onto elliptical shaped crossbars like what you have. Best option would be to go with a new J-style carrier that fits the bar shape. For that we have…

view full answer...