Does Trailer Hitch Receiver fit 2020 Acura MDX A-Spec

Question

Question:

does the regular trailer hitch for a 2020 Acura MDX also fit a 2020 MDX A-spec?

asked by: John T

0

Expert Reply:

I confirmed with our trailer hitch manufacturers that each of the trailer hitch receivers are a fit for the 2020 Acura MDX A-Spec:

- etrailer Trailer Hitch Receiver # e98840

- Curt Trailer Hitch Receiver # C13146

The three hitches are the same installation and have the same ground and bumper clearance, but the one thing that sets them apart is the finish. The etrailer Trailer Hitch has a matte black finish which really helps diminish any type of scratches or blemishes will inevitably occur and it also just looks really nice, so that's the route I recommend going.

The accompanying photos are of the etrailer hitch on an Acura MDX A-Spec so you can see how it will look on yours.

expert reply by: Kyle S

0

click to enlarge

Rebecca

1/12/2021

What would I need for a Acura 2019 MDX Aspec hitch?

Reply

Jon G.

1/15/2021

Any of the hitches that Kyle mentioned above will fit your 2019 model as well.

Reply

Answer 1

According to Curt, their #C13146 is a fit for all models on the 2020 Acura MDX, including your Sport Hybrid. When installed, the crossbar of this hitch will be fully concealed behind the bumper with the only visible portion of the hitch being the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

As long as the wheel size of the spare is less than 18 inches in diameter the etrailer hitch part #e98840 will fit your 2019 Honda Pilot and will allow you to keep the spare. I attached a picture that shows the hitch installed with the spare…

view full answer...

Answer 4

For your 2018 Acura MDX the aftermarket trailer hitch that will be most similar to the OEM/factory unit is the etrailer.com Class III Hitch #e98840. The primary difference between the OEM hitch for the Acura MDX and an aftermarket model is their…

view full answer...

Answer 5

I do see the Receiver #C13146 and 4-Way #118628 you got from us for your 2020 Acura MDX. Depending on if you got a 7-way like our Kit #ETBC7 which includes the wiring needed for a charge line or just an Adapter #37185 will decide what all you need…

view full answer...

Answer 6

Hey Russ, the Curt Echo #C51180 will work regardless of if the headlights of the vehicle are off or on. You might be thinking of RV cameras that require the running light circuit of the tow vehicle to be on to be active but the Echo does not look at…

view full answer...

Answer 7

The installation of a trailer wiring harness on your 2022 Honda Pilot may seem difficult but it is not as complicated as you would think. The first thing would be deciding on what wiring harness to use, I recommend the T-One Vehicle Wiring Harness…

view full answer...

Answer 8

For the initial settings when you first start the test drive, you should start with the lowest braking setting on the output of the Curt Echo #C51180. This initial setting is the same no matter the weight of your trailer. When you are testing the…

view full answer...

Does Trailer Hitch Receiver fit 2020 Acura MDX A-Spec

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching