Recommended Initial Settings for Testing the Curt Echo Brake Controller # C51180
Question:
What settings do you recommend for initial install? This is for a 2018 Ford F-150 with 5000 pounds dry weight. Thanks i appreciate it.
asked by: Leonard B
Expert Reply:
For the initial settings when you first start the test drive, you should start with the lowest braking setting on the output of the Curt Echo # C51180. This initial setting is the same no matter the weight of your trailer. When you are testing the output, you do not adjust any settings on the sensitivity of the controller. At approximately 25 mph, apply the vehicle's brakes on a safe area that has a paved, level surface. If the braking is insufficient, increase the output before testing again. If the trailer brakes lock up, the output needs to be decreased. This process should be repeated until the trailer stops are firm and just short of locking up.
Once the brake output is set, you go through the same process starting with the lowest setting on the sensitivity of the controller until you get the desired feel.
I went ahead and attached the exact manufacturer's steps for implementing the controller settings for your convenience.
(click to enlarge)
Product Page this Question was Asked From
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Brake Controller
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Does Curt Echo Brake Controller Require Headlights to be On and is iPhone App Still Buggy
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Troubleshooting Curt Echo Not Connecting To iPhone 13 and Changing From Blue To Green Flashing Light
- Video: Review of Tow Ready No Drill Mount Bracket - 18136
- Shop: No-Drill Mount Bracket, Long
- Video: Camco RV and Camper Steps - Motorhome - CAM43676 Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: No Power To Brake Controller After T-One Vehicle Wiring Harness with 7-Way Install On 2015 Acura MDX
- Search Results: etbc7
- Search Results: wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: 7 way to 4 way adapter
- Search Results: 4 way to 7 way adapter
- Video: Tekonsha T-One Vehicle Wiring Harness Installation - 2020 Acura MDX
- Video: Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118628 Review
- Video: EZ Connector to 7-Way RV Adapter Review
- Video: Curt Echo Mobile Trailer Brake Controller Installation - 2016 Acura MDX
- Video: Review of etrailer - Brake Controller - ETBC7
- Search Results: brake controller
- Q&A: Trouble Connecting iPhone to Curt Echo App
- Q&A: What Is the Bluetooth Range of the Curt Echo Mobile Trailer Brake Controller C51180
- Q&A: Will the Curt Echo Wireless Brake Controller Still Allow Trailer Battery to Charge
- Q&A: Can Curt Echo Brake Controller be Used with iPhone 7 Plus
on Trailer Brake Controller
