Which Roadmaster Reflex Steering Stabilizer Fits 2000 Newmar Mountain Aire

Question

Question:

I have a 2000 Newmar Mountain Aire. I’d like to get the Roadmaster Reflex Steering Stabilizer Which fits mine?

asked by: William Z

0

Expert Reply:

I did some checking and your 2000 Newmar Mountain Aire is built on a Ford F-53 chassis with a 20,500 GVWR so the correct stabilizer you'd need is the # RM-RBK22-RSSA which I attached an install video for as well.

expert reply by: Jameson C

0

Answer 1

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 2

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 3

Depending on how your Topkick is equipped, you may need up to 3 items to install a brake controller. If the vehicle does not already have a trailer wiring harness you will first need to install a 4-way wiring harness. Since you seem to have a…

view full answer...

Answer 4

If you need 18 feet of E-track I recommend using 2 pieces of 8 feet Horizontal E-track part #E19135 and 1 piece of 2 feet E-Track part #EM59150. 8 feet is the longest Horizontal E-Track available. The E-track pieces are not designed to be mounted…

view full answer...

Answer 5

The inside dimensions of the Malone Profile18S Rooftop Cargo Box #MPG910 are 76" long x 30" wide x 14-1/2" tall.

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

Thanks for reaching out! I recommend going with the Curt Hitch Receiver #C65CR for a standard hitch or the Hidden Hitch by Draw-Tite Trailer Hitch Receiver #DT46GR if you want the option to remove the receiver for a complete OEM look on your 2022…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 10

We do have 205/75R14 size radial tires that have a load range of D and a speed rating of at least 81 mph. Out of our available selection I recommend going with the Kenda Karrier #AM10235. This tire has a max load rating of 2,200 lbs at 75 psi and a…

view full answer...

Answer 11

Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…

view full answer...

Answer 12

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Which Roadmaster Reflex Steering Stabilizer Fits 2000 Newmar Mountain Aire

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching