How To Reuse Curt A25 Hitch Head on 2020 GMC Sierra 3500

Question

Question:

Will the top of the one of my 2017 Q25 fit the base of the 2020?

asked by: Darrell

0

Expert Reply:

Yes, the Head Unit for Curt Q25 5th Wheel Trailer Hitch part # C16565 will fit the Curt OEM 5th Wheel Hitch Legs part # C16025 which is a fit for a 2020 GMC Sierra 3500.

expert reply by: Conner L

0

Answer 1

Yes, you can take the head of your current hitch #C16039 and install it on the leg kit part #C16025 and it will fit the factory rail kit of your 2017 GMC Sierra 3500 with factory rail kit.

view full answer...

Answer 2

The fifth wheel hitch I always recommend for a 2023 GMC Sierra 3500 with OEM Prep Package is the B&W Companion OEM 5th Wheel Hitch part #BWRVK3710. The reason for this is that it's the best option available. The B&W Companion…

view full answer...

Answer 3

The difference is the application. The Curt #C16025 legs fit the factory GM pucks from model year 2061-2019. For the 2020+ model year, GM decided to change the layout of their factory pucks which required a design change for the legs. The Curt…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 8

The head alone for the B&W Companion hitch #BWRVK3500 weighs about 70 pounds. Everything else weighs about 130 pounds. So the total weight of the hitch is approximately 200 pounds.

view full answer...

Answer 9

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 10

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 11

A wedge is needed, yes, and the Lippert Turning Point pin box does come with a universal wedge, but it is not a very good fit with the B&W Companion #BWRVK3710. So I highly recommend instead using the 5th Airborne Custom Wedge for B&W Fifth…

view full answer...

Answer 12

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

How To Reuse Curt A25 Hitch Head on 2020 GMC Sierra 3500

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching