Can 2013 Jeep Wrangler be Flat Towed with Ready Brute Elite Tow Bar

Question

Question:

Will this base plate work with the ready brute elite tow bar? I have a 2013 jeep wrangler unlimited

asked by: Kathy

0

Expert Reply:

I have a base plate kit adapter that will allow you to flat tow your 2013 Jeep Wrangler with a Ready Brute Elite tow bar but not Roadmaster since they don't have an adapter. Instead you'd need to go with a Blue Ox base plate kit # BX1126 so that you can use the adapter # BX88297 and you'd be set.

expert reply by: Jameson C

0

Answer 1

For your 2013 Jeep Wrangler Moab Edition, you will want to use the Roadmaster XL Base Plate Kit #1439-1. In addition to a base plate kit and tow bar, you will need safety cables, lighting, and a supplemental braking system to complete your…

view full answer...

Answer 2

With the etrailer Invisible Base Plate Kit #e98948, there isn't any adapters to allow you to use the Ready Brute II tow bar. What you're going to want to do is, use the Blue Ox Base Plate Kit #BX1139 with the adapters #BX88297. From…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit #BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. From here, to complete your flat…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Jeff, did you try moving the flat tow setup and applying the brakes? The Blue Ox Patriot #BLU37FR has an inertia sensor that detects how hard you apply the brakes and decides how hard to apply the flat towed vehicle brakes so if you didn't…

view full answer...

Answer 7

To flat tow your Jeep Wrangler JK behind your motorhome, you will need a base plate kit, tow bar, safety cables, tail light wiring harness, and a supplemental braking system. Depending on the year of your Wrangler, you may also need a Brake-Lite…

view full answer...

Answer 8

Hi Scott, As long as your motorhome has the 'Spartan Safe Haul' system the Demco Air Force One Flat Tow Brake System for Spartan K2 400 Chassis RVs with Safe Haul #DM54YV would be compatible with the factory air lines on the motorhome. From…

view full answer...

Answer 9

We do offer tow bar setups that can attach to the D-rings on the Warn Elite Bumper. Your will need to use a D-ring adapter to connect the tow bar. For the adapter you have the following options: 1" Thick D-Rings #RM-035-1 3/4" Thick D-Rings…

view full answer...

Answer 10

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…

view full answer...

Answer 11

Hey Terry, this is a great question but I would assume due to the age of your SMI system and fact you have a hybrid now that has the different braking system it won't work. 20 plus years ago the braking system you have now was not around for SMI…

view full answer...