Trailer Wiring Harnesses for a 2020 Hyundai Palisade

Question

Question:

2020 Hyundai Palisade Which wireing harness

asked by: Gary

0

Expert Reply:

The trailer wiring harness I recommend for a 2020 Hyundai Palisade is the Curt T-Connector Vehicle Wiring Harness part # CU94FR. It is an easy plug and play install. Check out the attached video to see how it connects.

expert reply by: Conner L

0

Answer 1

I was able to confirm a trailer hitch fit for a 2023 Hyundai Santa Fe, the etrailer Trailer Hitch Receiver part #e28AR which is what I recommend. This trailer hitch offers a bolt-on fit so there's no drilling required. It has a class III rating…

view full answer...

Answer 2

For your 2022 Hyundai Palisade I recommend going with the Curt T-Connector Vehicle Wiring Harness #CU94FR due to it being a plug and play option that will not require any splicing. If you do not already have a trailer hitch receiver installed on your…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

For your 2022 Hyundai Palisade the best trailer wiring option is the Curt T-Connector which has the most reliable converter box and a very easy install. I attached an install video for this kit on a similar 20' Palisade for you to check out as…

view full answer...

Answer 5

For your 2020 Hyundai Palisade we have a couple of wiring options. These will both offer a 4 way flat trailer connector. They are almost identical, they install the same, have the same power output and are designed to protect your vehicle should…

view full answer...

Answer 6

I know exactly what you need and for the 2022 Hyundai Palisade, Curt has a wiring harness that does not require you to run a wire up to your battery. It is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item #CU94FR.…

view full answer...

Answer 7

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

view full answer...

Answer 8

First you will want to contact your Hyundai dealer as the factory trailer connector the Curt 56420 T-Connector Vehicle Wiring Harness #CU94FR connects too has a recall on your 2019 Hyundai Santa Fe. If your harness is not part of the recall there is…

view full answer...

Answer 9

We do have a wiring harness to fit your 2019 Hyundai Santa Fe. The correct part is #CU94FR. Since you have the tow package there's a connector under the rear bumper on the driver's side. The harness plugs in here and then you need to find a…

view full answer...

Answer 10

Yes, we do have a hitch receiver for your 2022 Hyundai Palisade that will allow you to tow your jet ski. It is the Curt Trailer Hitch Receiver item #C13427. This is a custom fit hitch that bolts directly to your Palisade's frame with included…

view full answer...

Answer 11

For your 2020 Hyundai Santa Fe that's equipped with the factory tow package, the trailer wiring harness is the Curt T-Connector #CU94FR. This custom harness is going to plug right into that factory tow port beneath the vehicle, on the…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Trailer Wiring Harnesses for a 2020 Hyundai Palisade

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching