bing tracking image
Q & A Icon

Correct Husky Weight Distribution Pin Hole Location  

Question:

I have the husky round bar setup. 800. To 8000 and does it matter. If I have the ball shank all the way in??

0

Expert Reply:

When setting up the Strait-Line Weight Distribution System w/ Sway Control part # RP66083 or any other similar to it it does not matter what hole you choose to do this. Once you have it set up you want to continue to use the same hole they are only a short distance from each other but it could change the position in which the sway control sits. If you choose to use a different hole than you set it up with double check the position of the sway control and adjust as necessary to correct the alignment issue.

I have linked the instructions for your reference should you need them.

expert reply by:
0
Randy B

Mark C.

4/19/2020

Ok. Will my camper hold back. If I have brakes set to aggressive from truck. When I don’t push the pedal on truck??

Etrailer Expert

Chris R.

4/21/2020

I'm not quite sure I understand what you're asking. Are you asking if your brake controller setting will affect the weight distribution system's performance?

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>