Mounting Hardware for Westin HDX Grille Guard with Punch Plate From 2016 Ford F150

Question

Question:

will this brush guard fit from a 2016 f150 to a 2020 f150 with different mounting kit ? if so witch part #

asked by: Paul F

0

Expert Reply:

The 2020 Ford F150 and the 2016 model would both use the same Westin Grille Guard, but the # 57-378PK is a mounting kit for a Westin HDX Grille Guard with Punch Plate for a 2015-2019 Silverado 2500 or 3500 and wouldn't fit your truck.

If the 2016 has the # 57-3830 or # 57-3835 Westin HDX Grille Guard with Punch Plate, you'd need the # 57-383PK.

expert reply by: Mike L

0

Answer 1

Hello Tim. We can definitely set you up with a complete AC system with an Advent low profile unit. We currently do not offer these parts as a package, but you can purchase all of the exact same components separately. To answer your question, yes,…

view full answer...

Answer 2

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 3

Thanks for reaching out, Chris! I couldn't find that part either but I bet they are referring to the Timbren Suspension Enhancement System #TGMRTT35D along with a spacer kit to take up that extra spacing. If your vehicle frame is the same…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 6

We do have replacement mounting hardware for the Aries Grille Guard on your 2008 Toyota 4Runner. If you have the #AA2058 the correct brackets and hardware are the #AABRKT-2058. If you have the #AA66XB then you need the #AABRKT-2066.

view full answer...

Answer 7

The Westin HDX Grille Guard you have now part #57-3835 fits the 2015 through 2020 F-150's so it should fit as-is and not require any different mounting hardware. Going with the new hardware #57-378PK won't give you anything…

view full answer...

Answer 8

The replacement mounting hardware for the Westin HDX Grille Guard with Punch Plate #57-3835 that fits your 2020 Ford F-150 is part #57-383PK. Please note that grille guards and their hardware kits are vehicle specific fits.

view full answer...

Answer 9

It sounds like you're looking for a replacement installation kit for a Westin Sportsman Grille Guard that fits a 2009 Ford F-150. If so, the Replacement Mounting Kit for Westin Sportsman Grille Guard #40-250PK is the correct kit to install…

view full answer...

Answer 10

The Replacement Mounting Hardware #W78XV you found is for the Grille Guard #57-3955 which fits a Silverado 1500. For your 2016 Ford F-150 we have the Replacement Mounting Hardware #W84HR which fits the similar Westin HDX Grille Guard with Punch…

view full answer...

Answer 11

The Replacement Hardware Kit for Westin HDX Grille Guard #57-3900PK is the correct kit for your Westin HDX Grill Guard on your 2019 Ford F-250 Super Duty. It includes all the hardware and mounting brackets necessary for installation. If you have…

view full answer...

Answer 12

Take a look at the diagrams I made that show the measurements of the replacement bracket #40-120PK. Also, the metal is around .233 inches thick. This is the replacement bracket for the Sportsman Grille Guard #45-1200.

view full answer...