Timbren Suspension Kit for a 2024 GMC Sierra 3500 with 2" Block in Rear

Question

Question:

Timbiren says i need a kit GMRTT35D-P1 for my vehicle due to it having a 2 block in the rear but i cant find that kit.

asked by: Chris H

0

Expert Reply:

Thanks for reaching out, Chris!

I couldn't find that part either but I bet they are referring to the Timbren Suspension Enhancement System # TGMRTT35D along with a spacer kit to take up that extra spacing.

If your vehicle frame is the same height as it was before the lift then you don't need a spacer, but if that 2" lift increased your frame height then you'll need to use the 1" Spacer # TA25723-90AD00 (1 for each side) and get some longer mounting bolts from your local hardware store.

expert reply by: Jon G

0

Answer 1

Generally speaking, most leveling kits lift the front of the truck 1-2" to match the rear as the factory ride height on most pickup trucks nowadays is about 2" lower in the front than in the rear. This is usually to compensate for squatting…

view full answer...

Answer 2

Thanks for reaching out, Chris! I couldn't find that part either but I bet they are referring to the Timbren Suspension Enhancement System #TGMRTT35D along with a spacer kit to take up that extra spacing. If your vehicle frame is the same height…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

Hey Michael, thanks for reaching out! The Timbren Active Off-Road Bumpstops #T28GR you installed on your 2018 Ford F-150 unfortunately have that reputation among users (although Timbren claims their systems provide a smooth ride). Because of this we…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

view full answer...

Answer 9

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

view full answer...

Answer 10

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Timbren Suspension Kit for a 2024 GMC Sierra 3500 with 2" Block in Rear

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching