Does Exhaust of 2020 Subaru Outback Wagon Require Lowering of Exhaust

Question

Question:

Just wondering if you need to lower the exhaust on a 2020 Outback in order to install this hitch #C67JR, as Ive seen on installs with older Outback models.

asked by: Ken

0

Expert Reply:

To install the Curt hitch part # C67JR on your 2020 Subaru Outback Wagon you will not have to lower the exhaust.

expert reply by: Jameson C

0

Answer 1

In order to install a trailer hitch on a 2020 Subaru Outback you will need to trim the rear lower bumper fascia but this is unavoidable and very minor because it cannot be seen from the outside of the vehicle. The amount of cutting will vary…

view full answer...

Answer 2

The Curt #C67JR weighs 31 lbs, so it's not impossible to manage on your own with some jack stands or some other manner of propping the jack up while you bolt it into place. I have linked the written instructions for you to take a look at.

view full answer...

Answer 3

I am happy to confirm that the Curt Trailer Hitch Receiver #C67JR you were looking at is confirmed to fit all models of the 2022 Subaru Outback Wagon so it will fit your 2022 Subaru Outback Wagon Wilderness even though it uses a slightly different…

view full answer...

Answer 4

I can tell you how to determine the approximate amount of ground clearance you'll have with the Curt Trailer Hitch Receiver #C67JR installed on your 2020 Subaru Outback, though as of this writing (January 2020) we have not been able to test fit…

view full answer...

Answer 5

We do actually have a video of the Curt #C67JR being installed on a 2022 Subaru Outback Wilderness! I have it linked below. You will not need to remove the bumper cover to get the #C67JR installed, but you will have to lower the exhaust and pop those…

view full answer...

Answer 6

For the Curt Hitch #C67JR, you will have to temporarily remove the rear bumper on your 2022 Subaru Outback Wagon for installation. However, once the installation is complete, you will simply reattach the bumper. If you know what kind of cargo you…

view full answer...

Answer 7

The Curt Trailer Hitch Receiver part #C67JR is an excellent option for a 2021 Subaru Outback Wagon. It is listed as a fit for all models regardless of options so yes it will fit a Onyx Edition XT.

view full answer...

Answer 8

The best trailer hitch available for your 2020 Subaru Outback Wagon is the Curt #C67JR because of its hidden crosstube design and superior black powder coat finish that tends to last longer than those from other manufacturers. Its hidden design…

view full answer...

Answer 9

Yes, the Curt Trailer Hitch Receiver #C67JR will fit your 2023 Outback Onyx Edition XT. This hitch features a concealed cross tube and a bolt-on installation. It has a 350 lb maximum tongue weight to handle your bikes and bike rack, along with a…

view full answer...

Answer 10

For a hitch that fits your 2020 Subaru Outback Wagon we have the Curt Class III part #C67JR which does require removing the rear bumper and cover. I also attached a link to this page that covers the entire install on a 2020 Subaru Outback Wagon just…

view full answer...

Answer 11

There is absolutely no drilling at all needed to install the Curt Trailer Hitch Receiver #C67JR on your 2020 Subaru Outback; installing the hitch will use a combination of your Subaru's existing hardware and the included bolts. In regards to…

view full answer...

Answer 12

Yes, in order to install a trailer hitch on a 2020 Subaru Outback you will need to remove the rear bumper but this is what allows the trailer hitch to have a hidden design so that you don't see a bulky crossbar. That said, I know this may seem…

view full answer...

Does Exhaust of 2020 Subaru Outback Wagon Require Lowering of Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching