Hopkins Trailer Wiring Harness Installation - 2022 Subaru Outback Wagon Video

To add a 7-way connector to your 2020 Subaru Outback I recommend the #ETBC7L which will plug into your existing 4-way connector and will only require you to make two connections, grounding the white tire to the frame of your vehicle, and running…

Yes, the EcoHitch Hidden Trailer Hitch Receiver, #EH34FR is a Class III hitch with a 2" receiver and will fit the 2020 Subaru Outback wagon and the 2022 Subaru Outback Wagon. This is a bolt-on installation and comes complete with needed…

The rating of a trailer hitch receiver and the vehicle it was designed for rarely match up perfectly. In most cases including this one, Draw-Tite tested the hitch to higher standards and found the #DT73RR capable of the 675lb tongue weight and 4500lb…

To install the Curt hitch part #C67JR on your 2020 Subaru Outback Wagon you will not have to lower the exhaust.

I have attached the installation instructions for the Hopkins Engager Trailer BreakAway Kit, part #20099. This kit includes a charger and an LED tester and will work with single and tandem axle trailers. I have also attached a link to an installation…

The EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2", part #306-X7601, is 2-1/2" from the face of the hitch receiver to the center of the hitch pin hole. It has a depth from the center of the hitch pin hole to the…

The difference between the Curt 13494, our part #C67JR, and 13570, our part #C69VV, trailer hitches is that 13494 has a hidden crosstube so all you see is the receiver, while the 13570 is more of a "classic" hitch that has the receiver…

The only wires that could be hot all the time on a trailer connector is the 12-volt hot lead, which is usually a black wire, and, if applicable, the auxiliary power wire, which is normally yellow or purple. The blue wire is usually for electric…

The Curt 4-Pole Vehicle Wiring Harness #C56040 does NOT provide a reverse light signal on its 4-pole connector, only stop, turn and running lights. The trailer connectors that can carry a reverse light signal will be either 5-pole, 6-pole or 7-pole…

Since the wiring for the reverse lights on your 2022 Subaru Outback are in the rear hatch door you will need to access the wiring where it travels from the hatch door into the vehicle. The best way to identify the correct wire is with a Test Light…

We do have what you need to add a 7-way trailer connector to your 2018 Subaru Outback Wagon but there isn't a specific custom harness that fits. If right now the Outback has no trailer wiring at all the easiest way to add a 7-way is to start with…