Do I Need to Remove the Rear Bumper when Installing the Curt # C67JR on My 2022 Subaru Outback?

Question

Question:

Do I need to remove the rear bumper when installing the Curt hitch on my 2022 Subaru Outback Wagon?

asked by: Rudy

0

Expert Reply:

For the Curt Hitch # C67JR, you will have to temporarily remove the rear bumper on your 2022 Subaru Outback Wagon for installation. However, once the installation is complete, you will simply reattach the bumper.

If you know what kind of cargo you wish to transport with the hitch, I would be happy to help you find the best products if you respond to this answer.

expert reply by: Bob C

0

Answer 1

The best trailer hitch available for your 2020 Subaru Outback Wagon is the Curt #C67JR because of its hidden crosstube design and superior black powder coat finish that tends to last longer than those from other manufacturers. Its hidden design…

view full answer...

Answer 2

The hitch I recommend for your 2020 Subaru Outback Wagon is the Curt Trailer Hitch Receiver #C67JR. This hitch is much more reasonably priced than the competition but it doesn't take away from its solid construction and sleek design. The 4,000 lb…

view full answer...

Answer 3

When it comes to installing a trailer hitch on your 2022 Subaru Outback Wagon Wilderness per the manufacturer The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2 inch #C67JR is confirmed to fit your vehicle. The trailer hitch has a concealed…

view full answer...

Answer 4

To install the Curt hitch part #C67JR on your 2020 Subaru Outback Wagon you will not have to lower the exhaust.

view full answer...

Answer 5

We do have a Draw-Tite Hitch that fits your 2018 Subaru Outback but #75082 isn't the right one. It fits previous generations of the Ford Ranger and Mazda trucks. The hitch you need is #75673. I included an image to show you what it will look like…

view full answer...

Answer 6

In order to install a trailer hitch on a 2020 Subaru Outback you will need to trim the rear lower bumper fascia but this is unavoidable and very minor because it cannot be seen from the outside of the vehicle. The amount of cutting will vary…

view full answer...

Answer 7

Yes, the Curt Trailer Hitch Receiver #C67JR will fit your 2023 Outback Onyx Edition XT. This hitch features a concealed cross tube and a bolt-on installation. It has a 350 lb maximum tongue weight to handle your bikes and bike rack, along with a…

view full answer...

Answer 8

The Curt Trailer Hitch Receiver part #C67JR is an excellent option for a 2021 Subaru Outback Wagon. It is listed as a fit for all models regardless of options so yes it will fit a Onyx Edition XT.

view full answer...

Answer 9

For a 2 inch trailer hitch for your 2020 Subaru Outback Wagon the Curt hitch part #C67JR is the best option. It is mostly hidden, the size you need, and has plenty of towing capacity. The difficult rating is related to time it will take to install…

view full answer...

Answer 10

Yes, in order to install a trailer hitch on a 2020 Subaru Outback you will need to remove the rear bumper but this is what allows the trailer hitch to have a hidden design so that you don't see a bulky crossbar. That said, I know this may seem…

view full answer...

Answer 11

For a hitch that fits your 2020 Subaru Outback Wagon we have the Curt Class III part #C67JR which does require removing the rear bumper and cover. I also attached a link to this page that covers the entire install on a 2020 Subaru Outback Wagon just…

view full answer...

Answer 12

There is absolutely no drilling at all needed to install the Curt Trailer Hitch Receiver #C67JR on your 2020 Subaru Outback; installing the hitch will use a combination of your Subaru's existing hardware and the included bolts. In regards to…

view full answer...

Do I Need to Remove the Rear Bumper when Installing the Curt # C67JR on My 2022 Subaru Outback?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching