How To Use the Yakima HoldUp for 1-1/4 Inch Hitch with 2 Inch Trailer Hitch Receiver

Question

Question:

Purchased Yakima Holdup Hitch Mounted Bike Rack in 2014. I changed from a 1 1/4inch hitch to a 2inch Curt Hitch. I have all the original parts. Do I need any additional parts for the installation?

asked by: Tim G

0

Expert Reply:

The Yakima HoldUp 2 Bike Rack is offered for both 1-1/4" trailer hitch receivers with part # Y02445 and 2" trailer hitch receivers with part # Y02443. In order to use the 1-1/4" version with a 2" trailer hitch receiver you will need the Replacement Tongue for Yakima HoldUp Bike Racks part # 8880580 and the Replacement Hitch Bolt and Clip for Yakima HoldUp part # Y8890200.

expert reply by: Conner L

0

Answer 1

Thank you for the photo of your older Yakima hitch bike rack for which you want to confirm the fit of replacement shank/tongue assembly #8880580. Yakima confirmed the fit of this part on your rack. You may also need Hitch Bolt #8890200 to secure the…

view full answer...

Answer 2

In order to convert your Yakima HoldUp #Y02445 to be compatible with a 2 inch hitch, you would only need the Replacement Tongue for Yakima HoldUp Bike Racks #8880580, which is a 2 inch tongue.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The Stealth Hitches Hidden Rack Receiver item #391KIATELL20 you were looking at would be a great option if you do not want to see the hitch at all when you're not using your Yakima EXO system. It has been confirmed to fit the 2023 Kia Telluride…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

How To Use the Yakima HoldUp for 1-1/4 Inch Hitch with 2 Inch Trailer Hitch Receiver

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching