Distance Between Mounting Holes on Rhino Rack 48 Inch Roller Accessory

Question

Question:

Whats the distance between the mounting hole centers on this item where it screws onto rack? Guessing 43inch or so, but need to be precise. Thanks!

asked by: Lee

0

Expert Reply:

The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks # RR43130 is 43-1/4 inches. This 48" roller is compatible with Rhino Rack Pioneer Platforms that are 54" wide, such as # RR42101BF.

expert reply by: Carla M

0

click to enlarge

Answer 1

The Blue Ox Patriot #BLU37TR operates the brakes of your 2015 Jeep Wrangler Unlimited Sahara just fine. This product applies enough force to the brake pedal that the brakes of your Jeep will apply adequately. The brakes of a vehicle still work when…

view full answer...

Answer 2

If you are testing the application of the Blue Ox Patriot part #BLU37TR with the brake pedal of your tow vehicle while at a stop you won't see the Patriot's brake pedal application move much since it's not sensing the amount of braking…

view full answer...

Answer 3

The Roller Accessory for Rhino-Rack Pioneer Platform Racks part #RR43131 is exactly what you need for the 72" Long x 56" Wide Rhino-Rack Pioneer Platform Rack on the 2016 Jeep Wrangler JKU. The Roller Accessory for Rhino-Rack Pioneer…

view full answer...

Answer 4

Yes, the Rhino-Rack Pioneer Platform Rack #RR86AB will fit the raised roof rails on your 2023 Ford Explorer. This tray is 60" long and 54" wide. I recommend installing the Fairing #RR43250 to help deflect air over the rack and give you a…

view full answer...

Answer 5

The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks #RR43131 is 45-1/4 inches. This 50" roller is compatible with Rhino Rack Pioneer Platforms that are 56" wide, such as #RR42112BF.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 12

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...