Distance Between Mounting Holes on Rhino Rack Roller Accessory RR43131

Question

Question:

Distance between mounting holes that screw onto rack?

asked by: Lee

0

Expert Reply:

The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks # RR43131 is 45-1/4 inches. This 50" roller is compatible with Rhino Rack Pioneer Platforms that are 56" wide, such as # RR42112BF.

expert reply by: Carla M

0

click to enlarge

Answer 1

Good question, and yes, you will want to remove your Rhino-Rack Pioneer platform rack should definitely be removed from your vehicle before installing the Roller Accessory for Rhino-Rack Pioneer Platform Racks - 50" Long #RR43131. The reason…

view full answer...

Answer 2

The 7 Gallon Road Shower by Yakima #Y89VR attaches to roof racks that have crossbars with mounting brackets that fit around the bars. So you'd need to install the load bar adapter #RR43137B on your Rhino Rack Pioneer Platform so that the…

view full answer...

Answer 3

The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks #RR43130 is 43-1/4 inches. This 48" roller is compatible with Rhino Rack Pioneer Platforms that are 54" wide, such as…

view full answer...

Answer 4

The Roller Accessory for Rhino-Rack Pioneer Platform Racks part #RR43131 is exactly what you need for the 72" Long x 56" Wide Rhino-Rack Pioneer Platform Rack on the 2016 Jeep Wrangler JKU. The Roller Accessory for Rhino-Rack…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 9

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Distance Between Mounting Holes on Rhino Rack Roller Accessory RR43131

Continue Researching