Rhino-Rack Pioneer Platform Rack For a 2023 Ford Explorer With Factory Raised Roof Rails

Question

Question:

Is there a roof tray confirmed to fit my 2023 Ford Explorer?

asked by: Myles

0

Expert Reply:

Yes, the Rhino-Rack Pioneer Platform Rack # RR86AB will fit the raised roof rails on your 2023 Ford Explorer. This tray is 60" long and 54" wide. I recommend installing the Fairing # RR43250 to help deflect air over the rack and give you a quieter drive. Depending on what you may be carrying on the rack the Roller # RR43130 will make it easier to get large heavy objects onto the rack.

expert reply by: Bud M

0

Answer 1

The distance between mounting hole centers on the Roller Accessory for Rhino-Rack Pioneer Platform Racks #RR43130 is 43-1/4 inches. This 48" roller is compatible with Rhino Rack Pioneer Platforms that are 54" wide, such as #RR42101BF.

view full answer...

Answer 2

The Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft #RR33200 requires the use of cross bars to be safely installed and anchored to your vehicle. This is true for Yakima products as well. However the Rightline…

view full answer...

Answer 3

The Roller Accessory for Rhino-Rack Pioneer Platform Racks part #RR43131 is exactly what you need for the 72" Long x 56" Wide Rhino-Rack Pioneer Platform Rack on the 2016 Jeep Wrangler JKU. The Roller Accessory for Rhino-Rack Pioneer…

view full answer...

Answer 4

I have a solution for you to add an awning that will work on your trailer with the Yakima roof rack, but because of the placement of that rear door and how high it raises above the roof, the Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On -…

view full answer...

Answer 5

The WingBar Evo roof rack is what you need to add aero-style Thule crossbars to your 2020 Ford Explorer. This roof rack consists of the 60" long WingBar Evo crossbars, Black #TH711520 or Silver #TH711500, along with the Evo Raised Rail Feet…

view full answer...

Answer 6

The answer is yes, the Tapered Extension #RR27RW for Batwing Awnings #RR33100 and #RR33200 can be used to cover more surface area or as sides to the initial awning so it essentially turns into a large tent covering. Attached is a review video as well…

view full answer...

Answer 7

The Inno Aero Crossbars - Aluminum - Black - 48" Long #INXB123-2 with Inno Flush Feet #INXS100 that you mentioned are confirmed to fit the roof of your 2020 Ford Explorer ST with factory raised rails running front to back. These crossbars meet…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...