Hitch Mounted Mud Flap Kit that Fits 2019 Ford F350 Crew Cab Dually 4x4

Question

Question:

Do you make this part to fit a dually pickup ?

asked by: Lane L

0

Expert Reply:

We have the similar Rock Tamers mud flap kit part # ERT00110 as a confirmed fit for your 2019 Ford F-350 dually but we do not have an Access kit similar that does fit.

expert reply by: Jameson C

0

Answer 1

The Rock Tamer #ERT00108 you have will work with the Rapid Hitch Adjustable ball mount like this one #AM3405. It has two hitch pin holes so use whichever one that leaves a 1 inch gap between your hitch collar and the adjustable part of your ball…

view full answer...

Answer 2

The Rock Tamers Heavy-Duty, Adjustable Mud Flap System for 2" Hitches #ERT00108 requires there to be 1 inch between the back of the ball mount and the opening of the hitch receiver as you can see in the graphic I've added below. The Rapid…

view full answer...

Answer 3

When you install the RockTamers part #ERT00108 you will want the flaps to hang 3-4 inches from the ground for proper ground clearance. You would want to take this measurement with the truck loaded and then use the pre-cut lines as a guide for making…

view full answer...

Answer 4

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Hitch Mounted Mud Flap Kit that Fits 2019 Ford F350 Crew Cab Dually 4x4

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching