Easiest Trailer Hitch to Install on 2019 Toyota CH-R

Question

Question:

How hard is it to install a hitch on my 2019 Toyota CHR?

asked by: Denisse M

0

Expert Reply:

If you're looking for the easiest hitch to install on your 2019 Toyota CH-R, then the Curt # C11567 is your best option. Installing this hitch is actually pretty straight forward:

To gain access to the mounting points, you'll begin by removing two underbody panels on the rear of the vehicle. From there. remove the fascia clips holding the lower bumper fascia to the rear bumper body panel.

With the panels out of the way, remove the bumper beam assembly. Once removed, use a hammer to flatten out the two metal tabs on each end of the bumper beam.

Finally, loosely attach the hitch onto the bumper beam with the provided hardware before raising it back into position and reattaching the bumper beam on the vehicle. Torque the hardware to the specs listed in the installation instructions. Re-install the fascia clips and underbody panels and you're ready to hit the road!

If you click on the video link provided, you can see the # C11567 hitch installed on a Corolla Hatchback. The steps to install the hitch on your CH-R are pretty much the same with the exception of how the panels and bumper fascia clips are removed.

expert reply by: Carla M

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Easiest Trailer Hitch to Install on 2019 Toyota CH-R

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching