Curt Hitch for 2017 Buick Envision that Allows Reinstall of Lower Rear Bumper Cover

Question

Question:

After instalation of this hitch will the bumper hitch/cover go back in place using the 2 screws removed during he installation of the hitch. I dont mind having to replace the two screws and cover when not using the hitch as we dont want to see the hitch when not in use. Thanks for your informaton,

asked by: Ed Z

0

Expert Reply:

You can reinstall the lower rear bumper cover of your 2017 Buick Envision after the install the Curt trailer hitch part # C13292 you referenced. If you check out the 20 second mark of the install video I attached you can see our installer removing the cover easily to access the hitch as needed.

expert reply by: Jameson C

0

John C.

4/21/2020

My hitch is on the way, but I need a torque wrench. Can you tell me what torque is required on the chassis bolts?

Reply

Chris R.

4/23/2020

For the Class III Trailer Hitch # C13292, Curt states to torque all 7/16" hardware to 59 ft-lbs and all M10 hardware to 40 ft-lbs.

Reply

G.chadha

1/11/2021

Hi, I'm looking at the hitch #C13405. Is that compatible with a 2018 envision or do I need to stick to #C13292 ? I'm interested in a product where i would not need to take the trim apart but understand if that will be the only option

Reply

Jon G.

1/15/2021

The Curt Hitch # C13405 fits a 2019 - Current Buick Envision. Since you have the 2018 you're going to need to stick with the Curt # C13292 mentioned above. The one nice thing about this option is that you can put the trim piece back in place if you want that OEM look. Otherwise there is no rule saying that you need to put that trim piece on anytime you aren't using the receiver - you can very well leave it off full-time if you want.

Reply

Answer 1

The 2017 Buick Enclave's tow package is not a standard feature on the vehicle, it is optional. As you noted, both of the 4-flat harnesses we offer, the Curt #C56364 and T-One #118725 require the car to have the tow package in order to work.…

view full answer...

Answer 2

The Draw-Tite Max-Frame Trailer Hitch Receiver #76080 still uses the wire ties to fix the fascia issue. This does solve the issue, but if you prefer an alternative I recommend the Curt #C13292. This hitch receiver does not install in the same…

view full answer...

Answer 3

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Curt Hitch for 2017 Buick Envision that Allows Reinstall of Lower Rear Bumper Cover

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching