Will Curt Trailer Hitch Receiver C13394 Fit 2020 VW Tiguan

Question

Question:

Just curious if anyone has installed this on a 2020? Does this fit on a 2020 Tiguan?

asked by: DanB

1

Helpful Expert Reply:

The Curt Trailer Hitch Receiver # C13394 that you referenced is not a confirmed to fit your 2020 VW Tiguan.

Instead, we have the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2", Item # DT53GR for your 2020 Volkswagon Tiguan.

expert reply by: Chris R

1

Answer 1

We do have photos for you to check out of a Volkswagen Tiguan with the Draw-Tite Trailer Hitch Receiver #DT53GR. I have added photos for you below of a Tiguan with the ##DT53GR, and as you can see the hitch is concealed with only the receiver…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #118811 is an excellent option for a 2019 Volkswagen Tiguan. In regards to installation, the power wire must be run to the battery as specified in the installations. The rear…

view full answer...

Answer 4

If you are concerned with keeping the OEM wiring safe on your 2019 Volkswagen Tiguan then the Curt T-Connector #C56403 that you are looking at is actually the perfect solution! Yes it does tee in with the tail lights on your Tiguan but those…

view full answer...

Answer 5

The etrailer hitch part #e98906 is listed as a fit for the 2009-2017 Volkswagen Tiguan. So, for your 2019 Tiguan, the hitch you need is the Draw-Tite #DT53GR, which fits all models, including the SEL Type R, like what you have. Once you remove the…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Will Curt Trailer Hitch Receiver C13394 Fit 2020 VW Tiguan

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching