Observation Camera Kit Recommendation for Coachmen 215RBK 2020

Question

Question:

I am picking up the captioned camera and it has the camera mount already installed. What camera do you recommend for the coachmen trailer camper?

asked by: Patrick M

0

Expert Reply:

Your Coachmen 215RBK was pre-wired for a Furrion observation system like the # FOS43TASF you referenced with has a 4.3 inch display screen. We also have the # FCE48TASL-05 which has a 5 inch screen and comes with side cameras with motion detectors too!

I really like the # FCE48TASL-05 since it allows you to see all around the trailer so it would be what I recommend.

expert reply by: Jameson C

0

Answer 1

Since your 2021 Passport was pre-wired for a Voyager camera setup all you need is the part #ASA24YR you referenced which will plug right into the wiring at the rear of the camper.

view full answer...

Answer 2

The Voyager WiSight Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen #ASA24YR system you were looking at plugs directly into the pre-wired socket on your 2021 Coachmen Apex Ultra Lite, so this is a great choice.…

view full answer...

Answer 3

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I…

view full answer...

Answer 4

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 5

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following: - B&W…

view full answer...

Answer 9

Thanks for reaching out, Michael! The Dexter Electric Trailer Brakes #K23-086-087-00 are compatible with 3,500 lb axles and have the standard 4-bolt pattern so if that matches the specs of your axle then this will definitely work for your…

view full answer...