Easiest Weight Distribution Hitch w/ 2-1/2" Shank to Connect/Disconnect Towing Grand Design Trailer
Question:
Which Weight Distribution Hitch System is easiest to use? Specifically, after the hitch is installed, which of all the systems is easiest and quickest to hitch up and / or disconnect from the truck? I have a new Grand Design Momentum 23g, which has a UVW of 7700, Hitch weight of 1242, and GVWR 13000. Pulling with a 2019 Ford F-250 Diesel.
asked by: Ryan
Expert Reply:
Hi there Ryan; thanks for the question and the easiest weight distribution hitch to connect and disconnect after initial set up is the B&W Continuum, with the right one for your 2-1/2" hitch being the following:
- B&W Continuum Weight Distribution System w/ Sway Control for 2.5" Hitch # BW28FR
Reason for that is you don't have to go through the process of pulling a bunch of pins at different spots at the head, arms, and brackets. You will have to pull up a latch release lever at the head to remove the load bar assembly, so it's a much less intensive than any other system.
Product Page this Question was Asked From
B&W Continuum Weight Distribution System w/ Sway Control for 2.5" Hitch - 16K GTW, 1.6K TW
- Weight Distribution Hitch
- WD With Sway Control
- Severe Sway
- Includes Shank
- Electric Brake Compatible
- Fits 2-1/2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- B and W
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt TruTrack 4P Trailer Mounted Weight Distribution System w/ Sway Control - 10K GTW, 1K TW
- Shop: B&W Continuum Weight Distribution System w/ Sway Control for 2.5" Hitch - 16K GTW, 1.6K TW
- Search Results: weight distribution hitch
- Search Results: continuum
- Search Results: b&w weight distribution hitch
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Search Results: lippert quick drop stabilizer
- Shop: MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 12K GTW, 1,200 lbs TW
- Shop: TruXedo TonneauMate Truck Bed Toolbox - Chevy or GM Full-Size Truck w/ Factory Track System
- Shop: Replacement Lift Brackets with Handle for Reese Weight Distribution Systems
- Shop: Equal-i-zer Wt Distribution Shank - 12" - 13" Rise, 9" Drop - 600 to 1,400 lbs TW
- Search Results: wd shank
- Search Results: truck tool box
- Search Results: tonneaumate
- Q&A: Can Equal-i-zer Weight Distribution Shank Fit with B&W Continuum
- Video: Review of Reese - Weight Distribution - RP58369
- Video: Reese Weight Distribution RP6637 Review
- Q&A: Longest Weight Distribution Shank for a 2-1/2 Inch Hitch Receiver
- Q&A: Lowest Drop Spec for B&W Continuum Weight Distribution System
- Video: Reese Strait-Line Weight Distribution System Installation - on a 2017 Chevrolet Silverado 2500
- Q&A: How Does The B&W Continuum Weight Distribution System Control Trailer Sway?
- Q&A: Can I Connect to the B&W Continuum Weight Distribution System at an Angle?
- Video: Reese Weight Distribution - WD With Sway Control - RP66074 Review
- Shop: Tool Box
- Shop: Tonneau Cover
- Q&A: How to Tell if Trailer is Standard or Underslung for B&W Continuum Weight Distribution System
- Video: B&W Continuum Weight Distribution System Review
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Suspension Enhancement