Maximum Tongue Weight Using 2-5/16" Ball With The B&W Tow & Stow 3-Ball Mount

Question

Question:

w/ the 2 5/16 ball the gross towing weight is 10k, what is the max tomgue weight?

asked by: Steve T

0

Expert Reply:

With the 2-5/16" Hitch Ball, the B&W Tow & Stow 3-Ball Mount # BWTS10047C has a 10,000 lb Gross Towing Weight and 1,000 lb Tongue Weight. This is of course is always limited by the capacity of your other towing system components like your vehicle and hitch. Included is a video overview with more information.

expert reply by: Patrick R

0

Answer 1

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 2

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 3

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 4

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 5

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 6

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 7

In order to match up the wheel studs for your Reliable 1206 hub, we'll need to know the full dimensions of the wheel stud you're replacing. In addition to the total length of the stud and its diameter and thread pitch, we'll also need to…

view full answer...

Maximum Tongue Weight Using 2-5/16" Ball With The B&W Tow & Stow 3-Ball Mount

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching