What Size is the Screw to Hold Replacement Knob on Ventline Vent

Question

Question:

What size is the screw to hold the knob in place??

asked by: DANIEL C

0

Expert Reply:

The screw that comes with Replacement Operator w/ Knob and Screw for Ventline Vent # BV0115-04 is a machine screw #8-32 x 3/4". It does come separately if you just need the screw, use # V0423-01, or if you just need the knob use # V0423-01

expert reply by: Robert C

0

Answer 1

I can help you find a new electric trailer jack for the 1998 TowLite 22 ft. camper. Atwood was recently acquired by Dometic. We currently do not carry the Atwood 80931 Deluxe Power Jack but the etrailer.com electric jack design by RAM part…

view full answer...

Answer 2

To determine what the right size of vinyl insert is you need, it is best to measure your current insert as it is laid flat, as opposed to the channel, though it sounds like what you need is actually going to be a 3/4" insert, for which we have…

view full answer...

Answer 3

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover, you will also…

view full answer...

Answer 4

The correct replacement for your VDO 433 / VDO 434 is going to be the: -Replacement Screen Frame with Screen for Ventline Ventadome Manual Lift Roof Vents #BVC0573-31. This part includes the replacement screen with the screen frame, however if you…

view full answer...

Answer 5

Thanks for the pictures of your roof vent lid Marty! Based on that the correct replacement is the Ventline part #BVD0449-A01 that you referenced if you wanted white or the part #BVD0449-A03 for the same smoke color you have now.

view full answer...

Answer 6

I do have a replacement screen available for the Ventline Ventadome VD0433 Trailer Roof Vent that you have on your trailer but they do not make a non-removable version that will work for you. Instead, I recommend replacing the screen with part…

view full answer...

Answer 7

Hey Paul, we have a Blue Ox base plate kit that fits your 2024 Nissan Versa with the part #BX1856. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle.…

view full answer...

Answer 8

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 9

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 10

For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need the Roadmaster…

view full answer...

Answer 11

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29" wide x…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

What Size is the Screw to Hold Replacement Knob on Ventline Vent

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching