Are There Replacement Foam Pads for the Thule Doubletrack Bike Rack

Question

Question:

Will this rubber hose fit the Thule bike rack Tube and Hook assembly.

asked by: Larry

0

Expert Reply:

I checked with Thule and they do not offer a replacement foam pad for the frame hooks on the Thule Doubletrack TH990XT. That said, we may still have options for you but you will need to measure the outer diameter on your frame hooks. If it is 3/8" or close then part # P177 could work or if it is 5/8" or close then part # HRSPR-FP could work. The pads are made of rubber/foam respectively so they should have some give in regards to inner diameter.

expert reply by: Conner L

0

Answer 1

I checked with my technical contact at Hollywood Racks concerning the dimensions of their Replacement Foam Pad for Bike Frame Hooks #HRSPR-FP. This replacement part measures 9-inches long x 1-1/8-inches wide and the inner diameter is approximately…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 5

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 6

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 7

Hi Tracy, We can for sure get you a 3-bike rack for your ebike with a step-thru frame and two regular bikes. This is especially doable because your ebike is on the lighter side at just 40 lbs, and with that in mind what I recommend is a rack from…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

I can help you choose between the Kuat Sherpa 2.0 and Kuat Transfer V2, as both are really nice bike racks. Let me start off, since you mentioned 3-bike rack, if that's what you were after you would need the Kuat Transfer V2 Bike Rack for 3 Bikes…

view full answer...

Answer 12

Either the Kuat Tranfer 1 #KU64FR or the RockyMounts MonoRail Solo 1 #RKY10007 would handle the bikes you describe easily. Both would hold the bikes by the tires, so the fact that the rack won't come into contact with the frame will work well…

view full answer...