Can Slipper Spring SP-179275 Replace 25 inch Flat Slipper Spring on Utility Trailer

Question

Question:

I have a utility trailer with a load capacity of 1360 lbs that has 25inch flat slipper 4 leaf springs can I use the rounded end slipper springs on this trailer.

asked by: Chuck S

0

Expert Reply:

Yes, the 4-Leaf Slipper Spring w/ Radius End # SP-179275 that you referenced will fit and work well on your trailer that currently has flat slipper ends. The capacity and length matches well so this would be a really solid choice.

I attached an install video for these springs for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I'm not sure of which exact leaf spring you have but in regards to welding the hangers to the frame, it's best to mock them up with the spring you plan to use prior to welding. This is the case for the Single-Axle Trailer Hanger Kit for…

view full answer...

Answer 2

It can be a flat end as long as the flat part is long enough that it can reach past the wet bolt just fine. For your application it looks like the 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles #e69SR is the closest that we have as…

view full answer...

Answer 3

It's hard to see in your picture but is the hanger open on the one side which allows the spring to slide out to the side? It shouldn't be open like that. If you need a replacement hanger we have the #115706S for if you have a 1-3/4 inch wide…

view full answer...

Answer 4

Looks like you found the chart that Jeff D made that shows common axle capacities based on diameter: Typical Axle Diameters Based on Axle Capacity - 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter - 3,500-lb Axles: 2-3/8 inch diameter -…

view full answer...

Answer 5

The difference is found in the application. The Slipper Spring styles, like part #SP-179275, are intended for use with more heavy duty applications, while the Double Eye styles, like part #e77SR are used to provide a more comfortable ride. The part…

view full answer...

Answer 6

Since you've got an aluminum frame trailer, I understand why you're looking for a bolt on solution. The only available bolt on hangers we have available would be the #CE14017G and #CE14016G but they are designed for slipper springs and not…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

The most I was able to find about the Coleman 4735CC201 leaf spring is that it's rated for 1,000 lbs which means it goes to a 2,000 lb axle. For that application we have the 4-Leaf Slipper Spring w/ Radius End #e69SR which measures 25-4/8"…

view full answer...

Can Slipper Spring SP-179275 Replace 25 inch Flat Slipper Spring on Utility Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching