Ford F-150 Curt Echo Troubleshooting  

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Jeremy, Typically with boat trailers the manufacturer will install hydraulic surge brakes because you don't have to worry about the water damaging wires like you would with electric brakes. That being said, if you use a heat shrink butt…

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

The only differences between the Demco Trailer Coupler #DM14976-52 and #DM88XR are the colors and the mounting bracket design. The part DM14976-52 is silver and has a straight, or no-drop, design with the bottom of the coupler being towards the top…

Thanks for reaching out, Chris! I couldn't find that part either but I bet they are referring to the Timbren Suspension Enhancement System #TGMRTT35D along with a spacer kit to take up that extra spacing. If your vehicle frame is the same height…

The Roadmaster D-Ring adapters like the part #RM-035-1 can be used with the Demco tow bars.

We have a way to install a 7-way on your 2021 Ford Bronco that does not have LED taillights but you'll have to first start with a 4-way like the part #C87BR and then convert it to a 7-way with the part #ETBC7 which also comes with the components…

Yes, the etrailer Invisible Base Plate Kit #e86YR is a compatible fit for a 2016 Ford F-150 and the Demco Excali-Bar III Non-Binding Tow Bar #DM9511013 without requiring any adapters.