What Is the Difference Between the Curt Hitch CU64FR (C13435) and C13399 for a Subaru Forester

Question

Question:

The specs look the same, and it seems like the 13435 is a newer version of the Curt 13399. Are there any differences? Should I spend the extra ~$ for the newer model? Thanks!

asked by: Ryan

0

Expert Reply:

Correct, the Curt Trailer Hitch Receiver part # CU64FR (C13435) replaced part C13399. The Curt Trailer Hitch Receiver part C13399 will actually not fit a 2018 Subaru Forester, only up to 2017 so the Curt Trailer Hitch Receiver part # CU64FR (C13435) is the one you will want to use. There was a change made to accommodate exhaust clearance issues.

expert reply by: Conner L

0

Answer 1

For your 2018 Subaru Forester XT I recommend the Draw-Tite Class III Max Frame Receiver Hitch #76182 because it features a hidden design where only the receiver is visible beneath the vehicle. This provides you with a clean, OEM appearance unlike the…

view full answer...

Answer 2

Curt requires the stabilizing/support strap, #18050, in order to alleviate the leveraging affect that a non-trailer load places on a hitch. At Curt they like to use the example of carrying a gallon of milk. Think of the strain that would be put on…

view full answer...

Answer 3

It looks like the carriage bolt spacers that come with the Curt Hitch part #C13144 are larger than the ones that come with the Draw Tite hitch part #75876 and that is why the Curt hitch requires enlarging the holes on the vehicle to get the bolts to…

view full answer...

Answer 4

My technical contact at Curt assured me that removing the heat shield when installing the Curt hitch #C13144 on your 2014 Subaru Forester will not cause any damage to your vehicle. The law mandating the heat shield requirement was originally geared…

view full answer...

Answer 5

Both the Curt Trailer Hitch Receiver #CU64FR and Draw-Tite Max-Frame Trailer Hitch Receiver #76182 are going sit virtually flush with the rear bumper on your 2018 Subaru Forester. If I had to give one the slightest edge it would be the Draw-Tite. The…

view full answer...

Answer 6

The Curt Trailer Hitch Receiver part #CU64FR which is a fit for a 2018 Subaru Forester is indeed incompatible with a weight distribution system. This is a device that is used to help distribute the weight of the trailer across both axles on the…

view full answer...

Answer 7

For your 2018 Subaru Forester, I'd recommend the Curt Class II, part #C12100. Typically, I'd recommend a Class III hitch with the 2 inch receiver opening because with a 2 inch receiver you'll have a much larger selection of available…

view full answer...

Answer 8

The most concealed trailer hitch that fits your 2018 Subaru Forester 2.5 touring would be the Curt #CU64FR which only has the hitch opening hanging below the rear bumper. The price is available at the link below. It would take right at 1.5 hours to…

view full answer...

Answer 9

The Curt Trailer Hitch Receiver part #CU64FR and the Draw-Tite Max-Frame Trailer Hitch Receiver part #76182 will have a concealed look therefore only the receiver tube opening will be shown once installed. In regards to the heat shield, this must be…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

What Is the Difference Between the Curt Hitch CU64FR (C13435) and C13399 for a Subaru Forester

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching