Base Piece for B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package

Question

Question:

Is it possible to by just the base for the BWRVK3370 . I already have the head piece. If so how much would it be. Thanks

asked by: Wes M

0

Expert Reply:

Yes! Just the base of the B&W Companion OEM 5th Wheel Trailer Hitch w Slider # BWRVK3370 is part # BWRVB3370 on our site.

Happy towing!

expert reply by: Jon G

0

click to enlarge

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The Sport Rack Anti-Rattle Hitch Lock for SportRack Bike Racks and Cargo Carriers part #SR0901 will work out well for your Curt bike rack. This will accomplish the same task as your original bolt keeping movement to a minimum but also allow you to…

view full answer...

Answer 3

There is not a locking mechanism for the head unit of the B&W Patriot 5th Wheel Trailer Hitch #BWRVK3255. You can lock the base of the Patriot to your base rails with the Base Rail Lock #C23256 and to keep the head unit of the Patriot in your…

view full answer...

Answer 4

I spoke with B&W about the B&W Companion OEM 5th Wheel Hitch like part #BWRVK3600 and they recommend using the Master Lock 1-9/16" Wide Solid Brass Body Padlock with 2" Shackle part #ML140DLH to lock the handles on the base and it…

view full answer...

Answer 5

Please note the attached image that explains options for the arm location positions. For your B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package, #BWRVK3370, I suggest starting with the rear most position. I suggest…

view full answer...

Answer 6

I went and pulled a Master Lock Python Cable Lock #8419DPF from our warehouse to test the lock mechanism of it and found that if left in the lock position you can keep sliding the cable through the lock, but to slide the cable back out the key has to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 12

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Base Piece for B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching