Do the 88" Aries ActionTrac Motorized Running Boards Come with Actuators and Sensors

Question

Question:

does your install kit come with the actuators and door sensors ?

asked by: Keith W

1

Helpful Expert Reply:

The 88" Aries ActionTrac Motorized Running Boards # AA3025183 that you referenced are just the boards. For a complete kit you also need the mounting bracket kit which comes with wiring as well. If the vehicle you are looking to install this on is the 2010 Ford F-150 that you put in for your vehicle info then the correct bracket kit is part # AA3025125. This combination of boards and brackets can be found as part # AA3048326 on our site. The motorized components are built into the boards but the wiring that comes with the bracket kit is what senses when the door is opened (not to mention that it includes what you need to mount the running boards).

expert reply by: Jon G

1

Answer 1

The replacement hardware kit for the Aries ActionTrac Motorized Running Boards with Custom Installation Kit #AA3047912 that fits your 2014 Ram 3500 Crew Cab is part #AA3025111. Please note that running boards and nerf bars are vehicle specific fits…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

If you have the Ford 3" hitch then you can definitely add it but, yes it would change the weight capacity. The TorkLift Cannon Hitch Extension item #TLE1636 only has a 3,600 lbs towing capacity and a 360 lbs maximum tongue weight. If used with a…

view full answer...

Answer 7

Hi Corey; the BAKFlip MX4 Hard Tonneau Cover #BAK48204 weighs 71 lbs. There are several different Extang 2.0's so I'm not sure which one you had. Using a 2019 2500 the Trifecta Signature 2.0 #EX94430 weighs 35 lbs and so does the Trifecta 2.0…

view full answer...

Answer 8

The BAKBox 2 Collapsible Truck Bed Toolbox #BAK92201 will be in a fixed position once installed. The bolts for the brackets are tightened down on each side to keep the toolbox in place. You can install it anywhere along the rails underneath the…

view full answer...

Answer 9

Since your Grand Design came with the CRE3000 equalizers you will need three of the MORryde X-Factor Crossmember item #MR33WR. All of the hardware is included. I have linked an installation video below.

view full answer...

Answer 10

The Lippert Ground Control 3.0 #LC358590 is designed to help support/stabilize a trailer, but it isn't meant to completely support the weight of the trailer so we'll need to use some other forms of support so you can install the Lippert AP…

view full answer...

Answer 11

According to my contact at MORryde, the MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR will work as long as they have the clearance to allow for the end plate to attach through the frame hanger and no obstructions…

view full answer...

Answer 12

I would be happy to help! When measuring for new leaf springs you need to either take them off of the trailer, or jack up the side of the trailer so that the axle is not carrying any weight. Based on the pictures of the leaf springs on your 2017…

view full answer...