Will Tonneau Cover from 2017 Chevy Silverado Fit 2019 Silverado

Question

Question:

Will a tonneau cover from a 2017 Chevrolet fit a 2019 new body style Chevrolet

asked by: Jeff

0

Expert Reply:

There was a pretty big change for the Chevy Silverados between the years 2018 and and 2019 which means the tonneau cover companies had to come up with new fits for the trucks. So what that means for you is that a tonneau from a 2017 Silverado would not also fit a 2019.

So for a 2019 Silverado with a 6-1/2 foot bed the BAKFlip cover you'd need is the # BAK226131, if you had a 5-3/4 foot bed you'd want the # BAK448130, or if you had an 8 foot bed # BAK226132.

I also attached a link to a page that will prompt you to select your bed length, once you do so you'll see all of the tonneaus we have for that vehicle.

expert reply by: Jameson C

0

Answer 1

The problem that you would run into with a folding cover such as #BAK72331 is if you leave it on but folded up flat it will be several inches above the truck bed sides. This means that when making tight turns the trailer's pin box could…

view full answer...

Answer 2

You will be able to tow the fifth wheel trailer with a BakFlip Fold Up Cover part #BAK72331 on the 2020 Ford F-350 long bed folded flat behind the cab but it will limit the cab clearance when making sharp turns with the fifth wheel. You will more…

view full answer...

Answer 3

I got in touch with Extang and they said that the Extang Encore Hard Folding Tonneau Cover will not work with the 2021 GMC Sierra 1500 with MultiPro Tailgate. This is because the Encore's rails will interfere with the way the MultiPro Tailgate…

view full answer...

Answer 4

With any tonneau cover, the TracRac you're looking at #TH27000XT-EX will not work. These ladder racks need to have acces to the inside rails of your truck bed. The only option you may have is the Thule TracRac SR #TH43003XT-501 and that will only…

view full answer...

Answer 5

I could not find a reference to that part number though we may be able to narrow it down some. Do you have a 6' or 8' bed? Do you have bed caps? And finally, access cab or double cab?

view full answer...

Answer 6

To determine if there are compatible hubs and associated bearings to replace your current hubs to a more standard size you will have to take several precise measurements on the spindle of your axle. It is recommended to use a set of dial calipers to…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...