Lower Priced Fifth Wheel Rail Kit Recommendation for 2005 Chevy Silverado 2500

Question

Question:

I have a Pullrite 2700 slider and need an installation kit for another truck - a 2005 SilveradoHD 2500. The 2700 is suppose to fit any industry standard base rails and Curt says the C16418-204 comes with industry standard base rails. Just want to confirm they are a match before I buy anything. Really want to use the Curt Rails to save money, every penny count when your on SS. Thx,

asked by: BOB B

0

Expert Reply:

Yes, the Curt fifth wheel rail kit part # C16418-204 that you referenced is a confirmed fit for your 2005 Chevy Silverado 2500HD, does also fit with your PullRite 2700 Superglide, and is the lowest price option for a rail kit for your truck so it's exactly what you are looking for! I attached an install video for this kit for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For the brackets and hardware only from Curt 5th wheel installation kit #C16418-204 you will need to use #C16418. I have linked a video showing all of the included parts. I have also linked a video showing an example installation for you.

view full answer...

Answer 2

In order to choose a replacement pin box for your '89 Featherlite Holiday Rambler you can either look for a pin box number on your current pin box (like 1621 or 0719 for example) but if you can't locate a number the next best thing to do is…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 7

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

view full answer...

Answer 8

If you are going to install two of the MORryde X-Factor Crossmembers #MR33WR on your tandem axle trailer Alan you would want to install them on the front and rear hangers. You can install a third one if you want on the middle hanger as well for even…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 11

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 12

There is a difference between a 7-way round and and 7-way rv blade connector. If you take a look at the accompanying photo, which is from our linked article on trailer wiring you can see that the connector on the left has blade-style pins while the…

view full answer...

Lower Priced Fifth Wheel Rail Kit Recommendation for 2005 Chevy Silverado 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching