How To Route The Trailer Connector To The Hitch on a 2019 Subaru Outback Wagon?

Question

Question:

How does this trailer harness install? Where do I put it when I'm not using it- do I just leave it hanging out of my vehicle?

asked by: Roy

0

Expert Reply:

The hardest part about the installation of the Tekonsha T-One # 118467 for your 2019 Subaru Outback Wagon is finding the plug to plug the harness into. Once you've located the plug on the driver's side of the vehicle in the rear cargo area, you can route the wiring along wheel well and under the cargo area panels for storage. This wiring harness is designed to stay inside the vehicle when not in use, so you'll want to store it inside the spare tire carrier compartment when it's not in use; when you're ready to tow a trailer, you can remove it from the compartment and hang it out of the rear hatch of your Outback wagon.

I've attached a video that shows the installation of the Tekonsha T-One # 118467 and how it is going to be stored when not in use that you can use if you're having difficulty locating the plug-in.

expert reply by: Erik B

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 11

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 12

Good morning Brenda. We do offer a trailer hitch for your 2016 Subaru Forester PZEV. The Draw-Tite #DT82MR is not the correct hitch though. That one is only for a 2010 or 2011 Volkswagen Amarok. Instead I recommend the Curt Class 3 Hitch #C13144…

view full answer...

How To Route The Trailer Connector To The Hitch on a 2019 Subaru Outback Wagon?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching