Mounting Bolt Hole Dimensions for Valet Truss and Quick Coupler for Dahon Folding Bikes

Question

Question:

Hi I have another folding bike with headtube mounts and was hoping this might fit.... do you have screw size and mounting hole distance on this item? Mine are just two holes, 15mm spaced. Thank you.

asked by: Steve M

0

Expert Reply:

The distance between each of the mounting bolt holes for the Valet Truss and Quick Coupler for Dahon Folding Bikes # 33413-5-06 is 5/8" which is roughly 15mm so the spacing should match, but since you'll only be using 2 of the bolts you might want to refrain from loading the basket to the max 20 lbs weight rating.

The bolts themselves are M6 bolts (6mm) and they have a fine thread count (which is similar to 28 threads per inch for a 1/4" bolt).

Let me know if you have any other questions!

expert reply by: Jon G

0

click to enlarge

Answer 1

I called my contact at Swagman and asked about replacement straps for your Upright Bike Carrier #S64720. They said the ratcheting straps will not work and there is only one replacement available. That is part #P168. There are two straps included…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

It is going well and I'd be happy to help you! For a 2024 Honda CR-V Hybrid Sport, I recommend the etrailer Hitch item #e98848 you were looking at. We have confirmed through our vendor and customer reviews that this hitch will fit the hybrid…

view full answer...

Mounting Bolt Hole Dimensions for Valet Truss and Quick Coupler for Dahon Folding Bikes

Product Page this Question was Asked From

Continue Researching