What is the Distance from the Ground to Top of the Ball on a 2006 Volvo XC70
Question:
Im looking at purchasing this hitch along with a harness/adapter for my 2006 Volvo XC70. The trailer manufacturer had indicated the trailer required the ball to be a certain distance from the ground. Are you able to tell me approximately what the measurement would be from the ground to the ball with this hitch on my car?
asked by: Kyle
Expert Reply:
I do have some measurements using Draw-Tite trailer hitch # 36297. On a vehicle we installed hitch # 36297 on, the hitch measured 11 inches from the ground to the top of the receiver. Keep in mind this is not the same model vehicle and there are bound to be differences in ride height so these measurements should serve as a general guide.
Then, when using the correct ball mount, # 36061, as indicated by the hitch manufacturer in the proper rise position, add another 3-1/8 inches to that 11 inches on the hitch. Then, using a 2 inch ball, # 19258, add another 2-3/4 inches from the top of the ball mount to the top of the ball.
The grand total is 16-7/8 inches from the ground to the top of the ball. Do keep in mind that every vehicle is going to be different so you have to give or take a couple of inches so just use 16-7/8 inches as a guide. I have included some links on the Draw-Tite hitch for you to view.
Products Referenced in This Question
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 3-1/8" Rise - 9-3/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 3 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 9-3/8" Long - 3,500 lbs
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: CE Smith Post Style Boat Trailer Guide Ons Review CE27620
- Video: Curt Trailer Hitch Installation - 2020 Hyundai Palisade
- Video: Choosing the Right Trailer Wiring
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Article: Trailer Hitch Installation Tips
- Q&A: Recommended 4-Pole Trailer Wiring Harness for 2002 Volvo V70 XC Towing Kayak Trailer
- Q&A: Recommended Trailer Light Converter for 1987 Volvo 245 Wagon
- Shop: Malone Kayak Hoist - 120 lbs
- Shop: CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair
- Shop: Yakima EasyRider Double Decker Trailer - 14-1/2' Long - 78" HD Crossbars - 500 lbs
- Shop: CE Smith Post-Style Guide-Ons with LED Lights for Boat Trailers - 40" Tall - 1 Pair
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: Recommended Hitch for a 2024 Toyota Grand Highlander
- Video: Choosing the Right Brake Controller
- Search Results: trailer hitch wiring
- Search Results: brake controller
on Trailer Hitch
