Scissor Stabilizer Jack Replacement for 2015 Dutchmen Kodiak 220RBSL

Question

Question:

Hello, I have a 2015 Dutchmen Kodiak 220RBSL and need to buy a replacement stabilizer jack for the back left but I dont know the part. This is what it looks like... JSC-30-IND

asked by: Robert R

0

Expert Reply:

The great thing about scissor leveling jacks like the # JSC-30-IND is that they are universal enough that you don't have to get exact match when replacing one like in your situation. So even if the # JSC-30-IND isn't exactly what you have now this will work great for you!

I attached a review video for this for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hey Frankie, The bracket for the Timbren Suspension Enhancement System #TFR250SDJ has a locknut in it that makes it feel like the bolt (part #4) is fully tightened when it's not. Their techs have stated that you just have to push past this point…

view full answer...

Answer 4

The Ark Drop Down Corner RV Stabilizer Jacks #ARK94FR are able to lock into place at 30 and 60 degrees as stabilizers. They also have the 90 degree position where it is rated for 1,929 lbs and then the stored position.

view full answer...

Answer 5

I reached out to my contact at Demco who was able to supply me with the attached dimensional photo of the Demco A-Frame Trailer Coupler #DM14793-95.

view full answer...

Answer 6

We do not carry the Trimark brand however, we do carry both Global Link and Bauer brands. These are direct replacements for the original Global Link and Bauer products as well as Lippert Components, Fastec (FIC), and the TriMark standard entry door…

view full answer...

Answer 7

As far as the necessary mounting size hole and the features provided, the Jensen #JWM60A RV Stereo you'd looked at would be the best replacement. The stereo has an AM/FM tuner, can play DVDs or CDs, is Bluetooth compatible and has aux and USB…

view full answer...

Answer 8

I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…

view full answer...

Answer 9

I have attached for you below a photo with the dimensions of the weld-on plate for the Ark Drop Down Corner RV Stabilizer Jack Kit part #ARK94FR. The plates are 117mm long x 72.50mm wide or 4.6" long x 2.8" wide.

view full answer...

Answer 10

I went to our warehouse and measured the Leveling Scissor Jack #JSC-24-IND. The bolts on the #JSC-24-IND are 2 inches apart center to center, just like they are in your photo. When closed, the stand measures 4 inches from the base to the top of the…

view full answer...