What is Needed to Install Brake Controller in 2019 Chrysler Pacifica

Question

Question:

Can you tell me what all I will need to install a brake controller in my 2019 Chrysler Pacifica?

asked by: Frank W

0

Expert Reply:

Installing a brake controller in your 2019 Chrysler Pacifica is going to depend on if you have the factory 7-way or no factory trailer wiring at all. If you do have the factory 7-way you can install a brake controller with just the correct wiring adapter. For example, the Tekonsha PowerTrac # 39523 brake controller requires just the Plug-In Wiring Adapter # TK93VR. You will plug in one part of the adapter to the controller and the other part to the port underneath your dash for a simple plug-and-play install.

If you do NOT have the factory 7-way you will need to add a couple of things, a 4-way connector as well as the Universal Installation Kit for Trailer Brake Controller # ETBC7, which will give you a 7-way connector, circuit breakers and the rest of the hardware needed to install a brake controller.

The correct 4-way harness for a 2019 Chrysler Pacifica is going to depend on what model it is:

- 2019 Chrysler Pacifica Limited, Touring L, Touring L Plus or Touring Plus: T-One Vehicle Wiring Harness # 118712
- 2019 Chrysler Pacifica LX or Touring: T-One Vehicle Wiring Harness # 118723

I have added links to video reviews of installations on a Pacifica of these harnesses, as well as a link to a brake controller install for you to check out.

expert reply by: Kyle S

0

Answer 1

Not all vehicles come with brake controller wiring under the dash. That said your 2017 Chrysler Pacifica SHOULD have a 7-way trailer wiring harness at the rear of it and should have brake controller wiring under the dash. If there is the rear 7-way…

view full answer...

Answer 2

I took a look at the online version of the owner's manual for your 2018 Chrysler Pacifica and it states that for this vehicle without the factory tow package it can pull a trailer that weighs up to 1,500 pounds. For models with the factory…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular…

view full answer...

Answer 6

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 10

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

What is Needed to Install Brake Controller in 2019 Chrysler Pacifica

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching