Brake Controller and Wiring Recommendation for 2019 Ford Escape

Question

Question:

Hello, I have a 19 escape with the 1.5 ecoboost I need to tow a 3500+ trailer and the dealership is telling me I need a brake control and a 7 pin adapter. is this possible?

asked by: Eli H

0

Expert Reply:

It is absolutely possible to add a wiring harness and brake controller to your 2019 Ford Escape, and there are a few parts you will need in order to do this, starting with a 4-way connector. For this, the best option is the T-One Vehicle Wiring Harness # 118802 because it is the most reliable harness with the highest maximum amperage for your Escape which means it offers the best protection against possible shorts. I've added a link to a video of it being installed on a '19 Escape for you to take a look at.

Then you will need to add the 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L for the brake controller I highly recommend, the Curt Echo Mobile Trailer Brake Controller # C51180. The Echo is by far the best option because it is the easiest brake controller on the market to use.

The reason the Echo is so simple is because it is controlled with an app on your smartphone, a device that you're already comfortable using so there is not going to be any unfamiliar hardware or poorly-written manual to keep poring over simply to use your controller. The Curt Echo will simply plug into the 7-way on the back of your Escape with absolutely no additional wiring necessary. This means no bulky unit in your cab, saving you precious space and the hassle of having to drill under your dash to mount it.

This is a proportional brake controller which responds to the deceleration of your truck for smooth braking. I have added a link to a video review of this controller for you to check out so you can see for yourself just how easy it is to use.

Finally, if you do not have a trailer hitch for your 2019 Escape, I recommend the Draw-Tite Trailer Hitch # 75758 and for a ball mount, I recommend checking out the Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 4" Drop or Rise Item # AM3462 which gives you up to 4" of rise or drop or # AM3411 which gives you up to 6-1/2” of rise or 5-1/2" drop. Both of these ball mounts can be adjusted in 1” increments to ensure you can tow level, and they come with a 1-7/8" hitch ball and 2" hitch ball to pair with your trailer's coupler.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 10

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...