Will the Thule Xsporter Work With Factory Drop-In Bed Liner On a 2019 Nissan Titan XD

Question

Question:

If my Titan has a pre-installed trunk bed liner, will I have any problems with installation or vertical movement of the XSportster Pro?

asked by: Dave M

1

Helpful Expert Reply:

The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack part # TH500XT is a fit for your 2019 Nissan Titan XD. The factory drop-in bed liner will not be an issue for the vertical adjustments on the uprights. I will say that the majority of trucks now come with the a factory drop-in bed liner and we have not yet heard back of any issues with this and the Thule Xsporter.

I have attached an install video for you on a truck with the factory drop-in bed liner just for reference.

expert reply by: Conner L

1

Answer 1

The Thule Xsporter Pro Truck Bed Ladder Rack #TH500XTB will not result in any embossing. The Xsporter will clamp onto your side rails and so long as you tighten clamp bolts to 10 ft-lbs using the included 7/32" Allen Key you won't…

view full answer...

Answer 2

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Answer 5

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 6

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Answer 12

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

Will the Thule Xsporter Work With Factory Drop-In Bed Liner On a 2019 Nissan Titan XD

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching