Powered Trailer Wiring Harness that Fits 2007 Ford Crown Victoria

Question

Question:

Can this module be used on a vehicle that is already a 2 wire system? I have a 2007 ford crown Victoria and I use want to use it for the powered taillight part.

asked by: Max

0

Expert Reply:

We have a trailer wiring kit that was confirmed as a fit for your 2007 Ford Crown Victoria with the part # C59236 and allows you to run a wire to the battery and is confirmed to fit with your 2-wire setup.

expert reply by: Jameson C

0

Answer 1

You are correct that the Tekonsha 119179 is no longer available and any videos for that product have been removed. We do have the Curt #C59236 which is a very similar 4-pole flat hardwire kit and will work nicely on your 2006 Mercury Grand Marquis.…

view full answer...

Answer 2

Although they may be similar, the Hopkins Plug-In Simple Vehicle Wiring Harness #HM11140504 only works with the 1998-2003 Ford Crown Victoria according to the manufacturer. In order to add a wiring harness to your 2001 Mercury Grand Marquis you will…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

I do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the #TK74CR which does not work for you based on the LED taillights.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

I have attached a picture below of the Curt Hitch item #C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item…

view full answer...

Answer 12

Yes the Curt hitch part #C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part #C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight wiring.

view full answer...

Powered Trailer Wiring Harness that Fits 2007 Ford Crown Victoria

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching