Where to Connect the Power Cable For Trailer Wiring on a Mitsubishi Outlander or RVR

Question

Question:

Hey I bought from you online and trying to install. I cant find the spot to connect the positive. The instructions say to the cable stud on the drivers side. Can you please describe this spot? Is this some point on the fuse box? Thanks

asked by: David B

0

Expert Reply:

The 12 volt power cable for the T-One Wiring Harness, # 118538, should be attached to the clamp that holds the battery cable on the positive post of the battery.

I attached a photo showing this type of installation on another vehicle that should be helpful. I also attached a link to instructions and a video that should help out. The vehicle in the video is different but the wiring principle is the same.

You would not want to attach the power wire to any other power source other than the battery because it could put your vehicles sensitive wiring and circuitry at risk if a short were to occur on the wiring harness or power wire.

expert reply by: Robert G

0

click to enlarge

Answer 1

The ground wire of Wiring Harness #118538 is going to be the white wire. As per the linked instructions, you are going to need to drill a 3/32" hole and secure that wire with the included eyelet and screw. The ground location should be on bare…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Where to Connect the Power Cable For Trailer Wiring on a Mitsubishi Outlander or RVR

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching