Where Does the Water Regulator Get Installed On a Camper

Question

Question:

Does the water flow regulator get installed on the faucet or camper?

asked by: Becky

0

Expert Reply:

The Valterra High Flow Water Regulator part # A01-1122VP will need to be installed on the city water inlet, on the exterior of the camper. This would be the only location that could protect the plumbing inside your camper. That said, I recommend you go with the Valterra Water Regulator and Pressure Gauge part # A01-1124VP which has an easy to read gauge instead.

expert reply by: Conner L

0

Answer 1

The Water Hose Brass Elbow - 90 Degree #37262235 actually doesn't have a regulator built into it which is why there is no psi range for it. For this same type of fitting that does have the regulator you'll need part #A01-2222 instead but it…

view full answer...

Answer 2

The max water pressure that most Rv/trailers can handle is 55 psi. This isn't a hard and fast rule but it is a general rule of thumb since most of them use the same type of fittings. If you were to use the Valterra High Flow Water Regulator…

view full answer...

Answer 3

Our water filters like #CAM40631 need to be used after the water goes through a regulator and is reduced to 60 psi or less. For a water regulator you can use #A01-1122VP which will keep the pressure at 50 to 55 psi.

view full answer...

Answer 4

We do offer an adjustable water pressure regulator, part #A01-1117VP, that includes a gauge to display the outgoing water pressure. Output water pressure is adjustable from 0 to 160 psi. I'd recommend using this to incrementally increase your…

view full answer...

Answer 5

A water regulator like part #A01-1122VP has a small filter that catches most of the debris you may have in the water. I have attached a photo of the regulator that shows the small screen. After the water pressure is reduced you can use the filter…

view full answer...

Answer 6

The most common way is to use bleach on fresh water tank, about 1/4 cup per 15 gallons and dump into an open container after flushing the system. If you have one of those kids pools, that would be perfect. Bleach rapidly degrades in the presence of…

view full answer...

Answer 7

Yes, we do have a wiring harness that will add a 7-way connector to the bed of your 2022 Chevrolet Silverado 1500. It is the Demco 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug - 10' Long item #DM8555002. This harness will put a…

view full answer...

Answer 8

For a MaxxAir cover that would let more air in you would need the part #MA00-955003 which has a translucent smoke finish. We don't offer without the mounting hardware but realistically even if we did the price wouldn't be that much better…

view full answer...

Answer 9

The correct big screen for the MaxxAir II RV and Trailer Roof Vent Cover part #MA26JR is the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers part #MA10-20121.

view full answer...

Answer 10

Both roof vent covers, Camco part #CAM40453 and MaxxAir part #MA00-933069, have the same purpose and fit on any standard 14 by 14 inch roof vent. Both of them allow you to keep your vent open during rain without water getting inside your trailer. The…

view full answer...

Answer 11

Both the MaxxAir Standard RV and Trailer Roof Vent Cover part #MA00-933066 and the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen part #CAM40431 are designed to fit 14" x 14" roof vents. The overall dimensions…

view full answer...

Answer 12

Before applying the #GG64FR Spray-On Ceramic 3-in-1 Wax, Griot's Garage strongly recommends removing the existing wax using a product such as the Foaming Surface Prep, part #349B3101. If the existing wax isn't removed, the product won't…

view full answer...

Where Does the Water Regulator Get Installed On a Camper

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching