Adjustable Water Pressure Recommendation for RV to Increase Water Pressure

Question

Question:

I need more water pressure in my 2017 5th wheel. Can I use a 50-55 psi regulator without bursting a pipe? I currently a 40-50 regulator.

asked by: Waynr

1

Helpful Expert Reply:

We do offer an adjustable water pressure regulator, part # A01-1117VP, that includes a gauge to display the outgoing water pressure. Output water pressure is adjustable from 0 to 160 psi. I'd recommend using this to incrementally increase your water pressure till you get it where you want without going overboard. Increasing the pressure slightly would not be a problem.

expert reply by: Jameson C

1

Answer 1

The Valterra High Flow Water Regulator part #A01-1122VP will need to be installed on the city water inlet, on the exterior of the camper. This would be the only location that could protect the plumbing inside your camper. That said, I recommend you…

view full answer...

Answer 2

Our water filters like #CAM40631 need to be used after the water goes through a regulator and is reduced to 60 psi or less. For a water regulator you can use #A01-1122VP which will keep the pressure at 50 to 55 psi.

view full answer...

Answer 3

A water regulator like part #A01-1122VP has a small filter that catches most of the debris you may have in the water. I have attached a photo of the regulator that shows the small screen. After the water pressure is reduced you can use the filter…

view full answer...

Answer 4

I'm not sure how your Furrion Vision S Wireless RV Backup Camera System #FOS43TASF is wired but what you will need to do to ensure the camera is off is use an in-line switch like the Pollak Light-Duty Toggle Switch #PK34513 to ensure it is off. I…

view full answer...

Answer 5

Thanks for providing that information it really makes this simple. To find the right Gen-Y we need to calculate your tongue weight using the formula GVWR x 0.22 = TW. The Z2900 has a GVWR of 14,495 lbs so the TW is 3,189 lbs. Based on this…

view full answer...

Answer 6

Hey Tim, thanks for reaching out! The Stromberg Carlson Base Pad Extreme for RVs and Trailers #SC33VR have a 6,000 lb rating for each Base Pad Extreme so you're looking at a total of 36,000 lbs for this kit of 6. Ideally your jacks will have the…

view full answer...

Answer 7

Yes, we do have a wiring harness that will add a 7-way connector to the bed of your 2022 Chevrolet Silverado 1500. It is the Demco 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug - 10' Long item #DM8555002. This harness will put a…

view full answer...

Answer 8

For a MaxxAir cover that would let more air in you would need the part #MA00-955003 which has a translucent smoke finish. We don't offer without the mounting hardware but realistically even if we did the price wouldn't be that much better…

view full answer...

Answer 9

The correct big screen for the MaxxAir II RV and Trailer Roof Vent Cover part #MA26JR is the Replacement Bug Screen for MaxxAir II RV and Trailer Roof Vent Covers part #MA10-20121.

view full answer...

Answer 10

Both roof vent covers, Camco part #CAM40453 and MaxxAir part #MA00-933069, have the same purpose and fit on any standard 14 by 14 inch roof vent. Both of them allow you to keep your vent open during rain without water getting inside your trailer. The…

view full answer...

Answer 11

Both the MaxxAir Standard RV and Trailer Roof Vent Cover part #MA00-933066 and the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen part #CAM40431 are designed to fit 14" x 14" roof vents. The overall dimensions…

view full answer...

Answer 12

Before applying the #GG64FR Spray-On Ceramic 3-in-1 Wax, Griot's Garage strongly recommends removing the existing wax using a product such as the Foaming Surface Prep, part #349B3101. If the existing wax isn't removed, the product won't…

view full answer...

Adjustable Water Pressure Recommendation for RV to Increase Water Pressure

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching