Weight Distribution System for Ford F250 with Lance Camper and Torklift Superhitch Extender
Question:
My setup, 2017 F250 4X4 Diesel, Superhitch with 24inch extension, stableloads, Lance 855 camper, flatbed trailer 7000 lb loaded 800 lb tongue weight. Lance is 3300 lbs loaded for travel. I am guessing the Lance has about 1000 lbs behind rear axle. With the weight of the camper and the 24inch hitch extension how would you calculate tongue weight?
asked by: Dale B
Expert Reply:
I think a fair assessment would be around 1,500 lb based on the numbers you mentioned. It does look like your truck isn't sagging though which is a pretty good sign. For a 1,500 lb tongue weight we have the Reese Titan kit part # RP66006 which has a tongue weight range of 1,000 to 1,700 lb tongue weight range.
Then for a higher rated shank that fits a 2-1/2 inch hitch size we have theTorklift part # TLM9010 which has a 30k capacity and works with the Reese WD system heads and the Torklift double hitch you have. For a hitch ball then we have the Curt # C40085 as well.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Raw Finish - 30,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Raw Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 30000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Adjustable Shank for TorkLift SuperHitch Everest Weight Distribution - 12-1/2" - 30,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 2000 lbs TW
- 20000 lbs GTW
- Fits 2 Inch Hitch
- SuperHitch
- TorkLift
more information >
Product Page this Question was Asked From
Reese Titan Weight Distribution w/out Shank - Trunnion Bar - 17,000 lbs GTW, 1,700 lbs TW
- Weight Distribution Hitch
- WD Only
- No Sway
- Shank Not Included
- Electric Brake Compatible
- Fits 2-1/2 Inch Hitch
- 1200 lbs
- 1300 lbs
- 1400 lbs
- 1500 lbs
- 1600 lbs
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Video: Optronics Right Angle 3-Wire Pigtail Installation
- Video: Command Electronics Trailer Lights 328-008-54102 Review
- Shop: Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Shop: 3-Wire Pigtail for Trailer Tail Lights - 3-Prong PL-3 Plug
- Shop: Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
- Video: Gen-Y Torsion Weight Distribution Shank Review
- Video: Blue Ox Adjustable Ball Mount with Pintle Hook Review
- Video: Equal-i-zer Weight Distribution Shank Review - 2013 Ford F-250
- Video: B and W Tow and Stow Pintle Hook Review
- Video: TorkLift Weight Distribution TLM9010 Review
- Search Results: p3 brake controller
- Search Results: tail light
- Search Results: tekonsha p3 brake controller
- Search Results: towing
- Search Results: hitch mount
- Search Results: horse trailer accessories
- Search Results: brake controller adapter
- Article: 5 Things to Know About Weight Distribution Hitches
- Shop: Towing Mirrors
- Shop: Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch - 8-3/4" Drop - 20K
- Shop: Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 8" Rise, 4" Drop
- Shop: CIPA Universal Fit Towing Mirrors - Strap On - Qty 2
- Shop: Strait-Line Weight Distribution w/ Sway Control - No Shank - Trunnion Bar - 17K GTW, 1,700 lbs TW
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Wiring Diagrams