Solera RV Slide-Out Awning LCV000163279 Dimensions

Question

Question:

The awning rail says 73in but the width says fits 6ft6in, is the fabric width 78 but the mounting rail is only 73in? My flange width is 72in. Does this come with all mounting hardware right out of the box or do I need other parts?

asked by: Paul

0

Expert Reply:

I understand the confusion Paul. According to Lippert, The Solera RV Slide-Out Awning part # LCV000163279 fabric measures 73" wide and the mounting rail measures 78" wide. This Slide-Out Awning fits RV Slide-outs between 68" - 73" wide and up to 48" long so this Slide-out will work well for you. I have attached an installation video for your reference.

expert reply by: Heather A

0

Answer 1

Looks like you have the Pendant Light part #277-000422 and are trying to replace the shade with the seeded glass shade part #277-000431. I spoke with my contact at Gustafson about the install process for the shade and they sent me: "He has to…

view full answer...

Answer 2

The correct Solera RV Slide-Out Awning for a 72" wide slide-out (flange to flange) is part #LCV000163279 for white or part #LCV000165063 black.

view full answer...

Answer 3

When determining the correct size Slide-Toppers you need for your 2018 Laredo 330RL, you just need to measure your box width, which is measured on the outside front of box, including flange. Starting with your 72 inch box width, you will need the…

view full answer...

Answer 4

There isn't necessarily 'one' correct spot. Typically, folks will install the connector so it's on the driver's side behind the wheel well. If you click the provided link, you can see a typical installation of a similar wiring…

view full answer...

Answer 5

The shortest gooseneck wiring harness we offer is the Draw-Tite 5th Wheel and Gooseneck Wiring Harness with 7-Pole for Dodge with Factory Tow Package #20111. This wiring harness is 7 feet long and will install behind the factory 7-Way on your 2007…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...